# ASROCK h110 BTC + 1080ti

**URL:** <https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018>\
**Category:** Mining Support\
**Created:** [January 18, 2018, 4:38pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018 "2018-01-18T16:38:45Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 4:38pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/1 "2018-01-18T16:38:45Z")

</div>

Hey guys,  
I’m having the same issue over and over again.  
Everytime I try to add more than 8 GPU’s i’m getting a bunch of problems.

- Error “Screen cannot be attached”
- at first all gpu’s are shown but after some time at least one disapears
- Sol/s start dropping on different gpu’s

My spec:  
SMOS  
GPU: Gigabyte 1080ti OC gaming 11g  
MB: ASROCK h110 btc+ pro

There is no problem with OC/Risers…

btw I searched the forums(ASROCK, bitcointalk, etc) and there like a doze of topics on this issue and not even one solution.

I’m asking my self why the hell I bought this shit as MB that can run more than 8GPU’s

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 6:40pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/2 "2018-01-18T18:40:28Z")

</div>

What is the PSU u have or how are they powered

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 6:43pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/3 "2018-01-18T18:43:59Z")

</div>

I have x2 evga supernova 1600 PSU connected with adapter

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 6:45pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/4 "2018-01-18T18:45:13Z")

</div>

i hope not some sata/molex to 6pin or 8pin addapter

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 6:49pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/5 "2018-01-18T18:49:26Z")

</div>

I meant the two PSU’s connect with adapater

 ![IMG_6714](https://global.discourse-cdn.com/zcash/original/2X/a/ac359d1c4b7d8980659eab024cbb685fb33cbc0d.JPG)

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 7:08pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/6 "2018-01-18T19:08:10Z")

</div>

one question does it matter in which pcie are the gpus conected ? it is the same GPU faling each time or it is random

---

<div class="post-metadata">

**Author:** ![CitricAcid](https://avatars.discourse-cdn.com/v4/letter/c/cc9497/32.png) [@CitricAcid](https://forum.zcashcommunity.com/u/CitricAcid)\
**Post date:** [January 18, 2018, 7:11pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/7 "2018-01-18T19:11:56Z")

</div>

curious… didn’t you already post about this issue here?

> [@SMOS 1080ti error](https://forum.zcashcommunity.com/t/smos-1080ti-error/25960):
>
> I have a rig running with 1080ti Gaming OC 11g x3 fans SMOS Im keep getting this error there is no screen to be attached matching miner

you’ve been here long enough to know when you ask for help give us (details) information… you’re there we are not… if you are not detailed about your setup, we can’t help you.

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 7:14pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/8 "2018-01-18T19:14:34Z")

</div>

Which details would you like to know ? I though I did

---

<div class="post-metadata">

**Author:** ![CitricAcid](https://avatars.discourse-cdn.com/v4/letter/c/cc9497/32.png) [@CitricAcid](https://forum.zcashcommunity.com/u/CitricAcid)\
**Post date:** [January 18, 2018, 7:18pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/9 "2018-01-18T19:18:30Z")

</div>

> [@NutellaThief](#):
>
> Which details would you like to know ? I though I did

No, you shared a picture, what gpu it is and the MB type and your issue, thats it

why do I have to pull the information out of you?

It is your rig, DETAILS about your rig…, you built it… DETAILS

touch each piece and tell me everything about it

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 7:20pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/10 "2018-01-18T19:20:31Z")

</div>

riser version, USB cable thickens, or usb riser photo, Drivers version tried and if so how reinstalled  
atc… atc … why SMOS btw

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 7:28pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/11 "2018-01-18T19:28:39Z")

</div>

I wrote down that it is ASROCK h110 MB pro btc  
GPU: Gigabyte 1080ti oc gaming 11g  
Processor intel i3  
Ram : Kingston 9gb fury hyperx  
MB ver: 1.20  
PSU: x2 1600 evga supernova  
riser:007c

PSU #1: (Primary)  
Connected to first 5 1080ti and to the MB  
PSU #2: Connected with adapter to MB

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 7:29pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/12 "2018-01-18T19:29:45Z")

</div>

how are the risers connected to psu how many are connected to one lead  
BTW you should get better risers these are quete a crap the 007c get a "full board"risers search for verstion 009

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 7:33pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/13 "2018-01-18T19:33:44Z")

</div>

![IMG_3811](https://global.discourse-cdn.com/zcash/original/2X/3/3a12b84e17e6eef0600f028d4b848e140858afc7.JPG)  
connected with the SATA 15 Pin  
First 4 card on the same lead  
others 2-3

---

<div class="post-metadata">

**Author:** ![CitricAcid](https://avatars.discourse-cdn.com/v4/letter/c/cc9497/32.png) [@CitricAcid](https://forum.zcashcommunity.com/u/CitricAcid)\
**Post date:** [January 18, 2018, 7:37pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/14 "2018-01-18T19:37:53Z")

</div>

I know this isn’t helping you resolve your issue, but that connection setup is asking for a meltdown!

you should NEVER use an adapter from sata to anything.  
and one sata connection (without the adapter) per riser

though power issues, that this can and will cause, could be part of the issue

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 7:38pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/15 "2018-01-18T19:38:29Z")

</div>

> [@NutellaThief](#):
>
> connected with the SATA 15 Pin  
> First 4 card on the same lead  
> others 2-3

first problem sata rated for 4.5 A only u need to connect them on molex if possible that is rated for 11A  
…even 2 on sata is quite a owerkill with 1080TI

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 7:40pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/16 "2018-01-18T19:40:25Z")

</div>

CitricAcid imagine 3 x4.5Amps draving from one SATA power conector cable … the PSU have to be really good not to burn already

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 7:48pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/17 "2018-01-18T19:48:07Z")

</div>

![IMG_1438](https://global.discourse-cdn.com/zcash/original/2X/e/e3037292c6a0521c08b7e5f0e5b9838d44514387.jpg)  
 ![IMG_1439](https://global.discourse-cdn.com/zcash/original/2X/a/a696b77c13ff5d65610fa25aa3136f1e264bbe40.jpg)

So I should use from each cable only one sata connector ? and connect to the riser right

---

<div class="post-metadata">

**Author:** ![koso16](https://avatars.discourse-cdn.com/v4/letter/k/59ef9b/32.png) [@koso16](https://forum.zcashcommunity.com/u/koso16)\
**Post date:** [January 18, 2018, 7:57pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/18 "2018-01-18T19:57:34Z")

</div>

well the 1080TI should drain about 4.5-4.6A per GPU from the PCIe but the questionable is the sata power connector rated only 1,5A there is a possible meltdown of the connector anytime + a shortcut that would minimal kill the riser as per the photo it is a full board version with at least a basic protection circuit so your gpus should survive in such case  
but i would not test it if i would you still it is china 😃

BTW what other spare connectors do you have on the PSU

---

<div class="post-metadata">

**Author:** ![pnngball](https://avatars.discourse-cdn.com/v4/letter/p/9f8e36/32.png) [@pnngball](https://forum.zcashcommunity.com/u/pnngball)\
**Post date:** [January 18, 2018, 8:38pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/19 "2018-01-18T20:38:59Z")

</div>

With the PCI-E slots so close together on this mobo, have you considered (like others) putting some electrical tape on the risers to prevent them sorting? (should they touch for one reason or another)

---

<div class="post-metadata">

**Author:** ![NutellaThief](https://avatars.discourse-cdn.com/v4/letter/n/839c29/32.png) [@NutellaThief](https://forum.zcashcommunity.com/u/NutellaThief)\
**Post date:** [January 18, 2018, 8:42pm UTC](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018/20 "2018-01-18T20:42:20Z")

</div>

I got electrica ltape on the risers

[Next page](https://forum.zcashcommunity.com/t/asrock-h110-btc-1080ti/26018.md?page=2)
