@Undertrey I am almost sure that I did not change anything in autorun.bat, except this, MSIADelayTimer=60
Can I send the file to you and how?
Today version 1.8.2 released!
Changelog - [1.8.2]
- Significant code optimization.
- Clear the error list.
- Fix server switching. Added a message to which server number the miner switched.
- Added ignoring of additional coins during ether mining. Added support for classic ether.
- The restrictions for the config file and the file are increased.
- Most likely, the bug of the configuration file is completely fixed.
- The MSIA timeout setting has been moved to the configuration file. The waiting time is reduced by 20 seconds.
- Fixed the problem of determining 0 H/s (Sol/s).
- Added error handling of type: unknown error, cuda failed.
- Added support for XMR.
- The timeout of shares is increased to 15 minutes.
Список изменений - [1.8.2]
- Значительная оптимизация кода.
- Очистка списка ошибок.
- Исправление переключения серверов. Добавлено сообщение на какой № сервера майнер переключился.
- Добавлено игнорирование дополнительных монет при майнинге эфира. Добавлена поддержка классического эфира.
- Увеличены ограничения для конфиг файла и файла авторана.
- Скорее всего полностью исправлена ошибка обкусывания файла конфигурации.
- Настройка времени ожидания MSIA перемещена в файл конфигурации. Время ожидания уменьшено на 20 секунд.
- Исправлена проблема определения 0 H/s (Sol/s).
- Добавлена обработка ошибок типа: unknown error, cuda failed.
- Добавлена поддержка XMR.
- Таймаут шары увеличен до 15 минут.
Ewbf 0.3.4 version
Dstm 0.5.6 version
Claymore 12.6 version (Equihash)
Claymore 10.2 version (CryptoNote)
Claymore 10.2 version (Dagger-Hashimoto)
Let’s see if 1.8.2 resolves my issue first.
Can any one say which miner gives better sol/s , Ewbf 0.3.4 or Dstm 0.5.6 with Nvidia GTX 1070?
Thanks.
DSTM, but you must to find “sweet” spot for OC in DSTM.
Dstm better than Ewbf, i think you need to try and decide.
@Taja-Zemun thank you for helping peoples when i’m offline!
Try new version and tell me if problems with hashrate drop still exist. I’m increased timeouts to 5s.
@Undertrey You’re welcome.
It’s a lot better (maybe after few hours drop a little bit), but it depends on the coins and the nethash difficulty. Doesnt metter.
Would you be able to add a power shell ping function that will send mail, and not a telegram notice of a non-presence of pc on the network.
This happens when the PC is blocked and does not go to restart.
I have a script that happens to me twice in an hour on all computers and it send me email if some pc is not on the network (ping response).
will this script help if my DSTM just quits itself from time to time?
Yes, it will. Because Script monitoring bat file and zm itself.
@Undertrey - in the autostart.bat when I change the server address it doesn’t change it in the config - just wondering why is it in there, or what does it check if it doesn’t change any of the config settings?
thank you
You need to change it in config.bat manually.
This check needed to recreate new config file with old user data after update. (if i correct understand you)
So the autostart those settings are input in the new config file, got it, thanks so much for all your help. makes sense now
Today version 1.8.3 released!
Changelog:
- Fixed bug with temperature error.
- The screenshot function is added during the miner error.
Список изменений:
- Исправлена проблема с ошибкой температуры.
- Добавлена функция скриншота во время ошибки майнера.
Ewbf 0.3.4 version
Dstm 0.5.7 version
Claymore 12.6 version (Equihash)
Claymore 10.2 version (CryptoNote)
Claymore 10.2 version (Dagger-Hashimoto)
Bravo, Undertrey!
I was seeking for solution in making screenshot using Win standard soft, but failed to find elegant and short command in Powershell. You did that! Excellent.
Will be used
A.
possible support for ccminer?
Привет!
Прекрасная программа! Спасибо!
У мня вопрос-предложение:
По идее, каждая карта в риге должна иметь индивидуальные настройки. Но проблема в том, что после ресета пк, настройки часто слетают, особенно обидно, что слетает кривая частота/напряжение. Да, Ваша программа позволяет загрузить профиль из автобернера, но только единый для всех карт((
Идея такая, не знаю, осуществимая ли.
Сделать так, чтоб настройки считывались из файла, в котором всё заранее прописывается пользователем. Как считаете, такое реализуемо? Ну, хотя бы в платной версии)))
Спасибо!
Реально если использовать nvidia inspector. Там создается батник где каждой карте можно дать свою настройку. Нет смысла нагружать этим авторан.
@allin working on it…
Ок, спасибо, пошел штудировать тему)) А возможно будет привязать запуск этих батников к авторану? Я так понимаю, для семи карт мне нужно будет создать семь батников.
Или там иной механизм?