# General Mining Questions

**URL:** <https://forum.zcashcommunity.com/t/general-mining-questions/1467>\
**Category:** Mining Support\
**Created:** [September 4, 2016, 9:48am UTC](https://forum.zcashcommunity.com/t/general-mining-questions/1467 "2016-09-04T09:48:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![trolloniex](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/trolloniex/32/2833_2.png) [@trolloniex](https://forum.zcashcommunity.com/u/trolloniex)\
**Post date:** [September 4, 2016, 9:48am UTC](https://forum.zcashcommunity.com/t/general-mining-questions/1467/1 "2016-09-04T09:48:54Z")

</div>

Hi everyone new member here. I wanted to ask a few questions.

I’ve been testing out setting up a wallet and mining on Ubuntu 16.04 with a VM on Windows 10.

1. Is there a simpler way of checking if your mining other than ./src/zcash-cli getinfo ?

2. Is gen=1 in zcash.conf and being synced all I need to be up and running?

3. At current diff ~260-300 how long would it take to find a block with a fast CPU and are blocks every 2 minutes on testnet?

CPU doesn’t seem to heat up enough for me to be sure I’m mining unless I set procgenproclimit=#ofcores and yet again I’m not sure.

Both an i7 quad core processor and a 3930K (6 core cpu) gives me very close numbers 33 vs 25 respectively. I suppose thats due to single core performance or am I missing something here?

---

<div class="post-metadata">

**Author:** ![Voluntary](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/voluntary/32/4343_2.png) [@Voluntary](https://forum.zcashcommunity.com/u/Voluntary)\
**Post date:** [September 4, 2016, 11:16am UTC](https://forum.zcashcommunity.com/t/general-mining-questions/1467/2 "2016-09-04T11:16:39Z")

</div>

If you use Ubuntu’s System Monitor (or something similar on the windows side) you should see one core is always maxed out if you’re mining.

re: #2, that oughta do it.

The projected block time is 2.5 minutes. Sorry, I can’t tell you how often you should expect to get a block. And, if those numbers you’re referring to are from the zcbenchmark, the only reason one system should be faster than the other is if it has faster memory.

---

<div class="post-metadata">

**Author:** ![Dusares](https://avatars.discourse-cdn.com/v4/letter/d/f08c70/32.png) [@Dusares](https://forum.zcashcommunity.com/u/Dusares)\
**Post date:** [September 5, 2016, 7:40am UTC](https://forum.zcashcommunity.com/t/general-mining-questions/1467/3 "2016-09-05T07:40:57Z")

</div>

Hi,  
answers to your questions (respectively)

1. If you like typing commands, then open the terminal as root, and type this:  
apt-get install htop  
Then simply run htop and it will display all of running services, and how many cpu threads are being used (with percentage)  
I use htop with Ubuntu servers, and desktops

2. Yes

3. Voluntary explained it in a simple clear way:

> [@Voluntary](#):
>
> I can’t tell you how often you should expect to get a block. And, if those numbers you’re referring to are from the zcbenchmark, the only reason one system should be faster than the other is if it has faster memory.

and regarding this:

> [@trolloniex](#):
>
> Both an i7 quad core processor and a 3930K (6 core cpu) gives me very close numbers 33 vs 25 respectively. I suppose thats due to single core performance or am I missing something here?

No, you’re not missing any thing here, it’s all about RAM (Mostly) as Voluntary already explained.
