# GPU3 Hangs in OpenCL---Whats the issue?Help!

**URL:** <https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264>\
**Category:** Mining Support\
**Created:** [February 14, 2017, 7:00am UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264 "2017-02-14T07:00:51Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![dieselknight](https://avatars.discourse-cdn.com/v4/letter/d/4af34b/32.png) [@dieselknight](https://forum.zcashcommunity.com/u/dieselknight)\
**Post date:** [February 14, 2017, 7:00am UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264/1 "2017-02-14T07:00:51Z")

</div>

Greetings Everyone,

Need some help. Want know if anyone ran into this issue. Im mining using claymore 11.1 beta. Running a XFX 390x AMD with 15.12 drivers.

My miner tends to restart every 15-20 minutes. Stating that GPU3 Hangs in OpenCL call.

What does that error mean? I tried replacing the riser but still seems to be the same problem, over and over again.

Any Solutions?

---

<div class="post-metadata">

**Author:** ![zij](https://avatars.discourse-cdn.com/v4/letter/z/4af34b/32.png) [@zij](https://forum.zcashcommunity.com/u/zij)\
**Post date:** [February 14, 2017, 9:30am UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264/2 "2017-02-14T09:30:23Z")

</div>

Claymore’s version 12 is out now - try that instead. I could not get version 11 to be stable for more than an hour or so with RX480s, but version 12 running fine for last 15 hours or so.

---

<div class="post-metadata">

**Author:** ![dieselknight](https://avatars.discourse-cdn.com/v4/letter/d/4af34b/32.png) [@dieselknight](https://forum.zcashcommunity.com/u/dieselknight)\
**Post date:** [February 14, 2017, 4:11pm UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264/3 "2017-02-14T16:11:16Z")

</div>

thanks for the feedback. Tried that but apparently it made it worse. All red lettering lol. Ill just do process of elimination.

Do 1 GPU at a time and try to get to the root of the problem. I have no other options or solutions at this point lol

---

<div class="post-metadata">

**Author:** ![zij](https://avatars.discourse-cdn.com/v4/letter/z/4af34b/32.png) [@zij](https://forum.zcashcommunity.com/u/zij)\
**Post date:** [February 14, 2017, 4:19pm UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264/4 "2017-02-14T16:19:27Z")

</div>

I’m sure you’ve done this, but I found that upgrading version X to version Y with miners generally causes the new version to not work - and a reboot required to get any kind of stability. “stopping” the older version of the miner doesn’t seem to stop it cleanly - this goes for Claymore and Optiminer in my experience - but on restart, much better and no red lettering or other odd things.

---

<div class="post-metadata">

**Author:** ![DanLar75](https://avatars.discourse-cdn.com/v4/letter/d/9dc877/32.png) [@DanLar75](https://forum.zcashcommunity.com/u/DanLar75)\
**Post date:** [February 15, 2017, 9:28pm UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264/5 "2017-02-15T21:28:46Z")

</div>

I have the same issue after running Claymore 11.1 and then 12 for a few days. GPU3 hangs, every time.

---

<div class="post-metadata">

**Author:** ![malandante](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/malandante/32/3151_2.png) [@malandante](https://forum.zcashcommunity.com/u/malandante)\
**Post date:** [February 16, 2017, 8:32am UTC](https://forum.zcashcommunity.com/t/gpu3-hangs-in-opencl-whats-the-issue-help/14264/6 "2017-02-16T08:32:04Z")

</div>

It happens when you overclock or undervolt or both things altogether too much. Try relaxing the card a bit, don’t stress it so much. Bear in mind that even within the same model, not all the cards can admit the same OC/UV settings.
