# Installation problems

**URL:** <https://forum.zcashcommunity.com/t/installation-problems/3020>\
**Category:** Technical Support\
**Created:** [October 22, 2016, 10:47am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020 "2016-10-22T10:47:06Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![zlatkob](https://avatars.discourse-cdn.com/v4/letter/z/65b543/32.png) [@zlatkob](https://forum.zcashcommunity.com/u/zlatkob)\
**Post date:** [October 22, 2016, 10:47am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/1 "2016-10-22T10:47:06Z")

</div>

After the installation I run /zcash/./src/zcash-cli listtransactions or ./src/zcash-cli listunspent I get empty brackets:

[  
]

any idea why ? ./src/zcash-cli getinfo works fine and daemon is up and running.

b.r.

---

<div class="post-metadata">

**Author:** ![zlatkob](https://avatars.discourse-cdn.com/v4/letter/z/65b543/32.png) [@zlatkob](https://forum.zcashcommunity.com/u/zlatkob)\
**Post date:** [October 22, 2016, 11:33am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/2 "2016-10-22T11:33:51Z")

</div>

I have GUI Wallet installed. I do no see transactions. The rest looks well. Can somebody send me some test coin so I can check the wallet: tmD2FMfprqqis4boRhZ6DXt6eCwzSDD44Vn

---

<div class="post-metadata">

**Author:** ![zlatkob](https://avatars.discourse-cdn.com/v4/letter/z/65b543/32.png) [@zlatkob](https://forum.zcashcommunity.com/u/zlatkob)\
**Post date:** [October 22, 2016, 11:36am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/3 "2016-10-22T11:36:11Z")

</div>

![](https://global.discourse-cdn.com/zcash/original/1X/8d7c668d2d7b0ab073a8dcecf418ebc96e49fef0.png)

---

<div class="post-metadata">

**Author:** ![bwn](https://avatars.discourse-cdn.com/v4/letter/b/82dd89/32.png) [@bwn](https://forum.zcashcommunity.com/u/bwn)\
**Post date:** [October 22, 2016, 9:45pm UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/4 "2016-10-22T21:45:23Z")

</div>

Sent you a couple:  
txid 58f041c9414023eecc1583235b51b9d0f44e11a29bca1e1877ad64e4c755008a

---

<div class="post-metadata">

**Author:** ![zlatkob](https://avatars.discourse-cdn.com/v4/letter/z/65b543/32.png) [@zlatkob](https://forum.zcashcommunity.com/u/zlatkob)\
**Post date:** [October 23, 2016, 6:14am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/5 "2016-10-23T06:14:37Z")

</div>

Uaau it works, what is your P address I’ll send you one back to see if this part works too !

---

<div class="post-metadata">

**Author:** ![zlatkob](https://avatars.discourse-cdn.com/v4/letter/z/65b543/32.png) [@zlatkob](https://forum.zcashcommunity.com/u/zlatkob)\
**Post date:** [October 23, 2016, 7:17am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/6 "2016-10-23T07:17:00Z")

</div>

I figured it out. If your balance is 0 you see empty brackets when running: ./src/zcash-cli listunspent

Once one send you test coins ( or you mine it) ./src/zcash-cli listunspent shows you correct entries…“listunspent” --if noting is to spend I assume there is nothing to list 🙂

---

<div class="post-metadata">

**Author:** ![zlatkob](https://avatars.discourse-cdn.com/v4/letter/z/65b543/32.png) [@zlatkob](https://forum.zcashcommunity.com/u/zlatkob)\
**Post date:** [October 23, 2016, 9:07am UTC](https://forum.zcashcommunity.com/t/installation-problems/3020/7 "2016-10-23T09:07:48Z")

</div>

If  
[  
]  
you haven’t found a block yet

This is correct answer !!