# Miner- Claymore's Zcash Miner

**URL:** <https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114>\
**Category:** Mining\
**Created:** [November 4, 2016, 3:53pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114 "2016-11-04T15:53:57Z")\
**Posts on this page:** 20\
**Page:** 68

<div class="post-metadata">

**Author:** ![Nefandus](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@Nefandus](https://forum.zcashcommunity.com/u/Nefandus)\
**Post date:** [December 8, 2016, 9:03pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1360 "2016-12-08T21:03:47Z")

</div>

Okay thanks, ill try that.

---

<div class="post-metadata">

**Author:** ![gambler8899](https://avatars.discourse-cdn.com/v4/letter/g/6a8cbe/32.png) [@gambler8899](https://forum.zcashcommunity.com/u/gambler8899)\
**Post date:** [December 8, 2016, 9:22pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1361 "2016-12-08T21:22:11Z")

</div>

I have 3x290x and 2x290… one of 290x started showing 40-50sols, other 2 280.

Where should be problem :S?

---

<div class="post-metadata">

**Author:** ![DVD\_GR](https://avatars.discourse-cdn.com/v4/letter/d/ce7236/32.png) [@DVD\_GR](https://forum.zcashcommunity.com/u/DVD_GR)\
**Post date:** [December 8, 2016, 9:54pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1362 "2016-12-08T21:54:07Z")

</div>

yy 8% perf on 380x …

---

<div class="post-metadata">

**Author:** ![Nefandus](https://avatars.discourse-cdn.com/v4/letter/n/dec6dc/32.png) [@Nefandus](https://forum.zcashcommunity.com/u/Nefandus)\
**Post date:** [December 9, 2016, 12:45am UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1363 "2016-12-09T00:45:00Z")

</div>

While running claymore, I get the error message: WATCHDOG: GPU 2 hangs in copenCL call,exit 4 times, then says Restarting OK, exit… and then the whole computer freezes and I have to powercycle it. I have a z97x gaming 3 mobo, 8 gigs of ram, virtual memory set at 30 gb. 5 r9 nanos. No environmental variables Any Ideas?

---

<div class="post-metadata">

**Author:** ![gambler8899](https://avatars.discourse-cdn.com/v4/letter/g/6a8cbe/32.png) [@gambler8899](https://forum.zcashcommunity.com/u/gambler8899)\
**Post date:** [December 9, 2016, 10:10am UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1364 "2016-12-09T10:10:00Z")

</div>

Ok, I managed to solve issue with uninstalling problematic device (in device manager) and scan for hardware than, to get installed again.  
Hash rate is now ok.  
But after I reboot, hash rate drops again.

I reboot because rig freeze.

I really don’t know what to do :O.

---

<div class="post-metadata">

**Author:** ![duk3n](https://avatars.discourse-cdn.com/v4/letter/d/e9a140/32.png) [@duk3n](https://forum.zcashcommunity.com/u/duk3n)\
**Post date:** [December 9, 2016, 1:15pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1365 "2016-12-09T13:15:13Z")

</div>

check in bios pci-e set to gen 1 or gen 2 . On auto set may create troubles.

---

<div class="post-metadata">

**Author:** ![duk3n](https://avatars.discourse-cdn.com/v4/letter/d/e9a140/32.png) [@duk3n](https://forum.zcashcommunity.com/u/duk3n)\
**Post date:** [December 9, 2016, 1:19pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1366 "2016-12-09T13:19:55Z")

</div>

set back oc, then reduce intensity. I ve got few rejects too, about 4 to 1000 , there are few reasons , but on this low rate reject I prefer to not touch. reasons for rejects found by me : risers quality, pci-e power supply cables , high gpu temperature. .

---

<div class="post-metadata">

**Author:** ![trolloniex](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/trolloniex/32/2833_2.png) [@trolloniex](https://forum.zcashcommunity.com/u/trolloniex)\
**Post date:** [December 9, 2016, 1:35pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1367 "2016-12-09T13:35:16Z")

</div>

20 Sol/s more on new AMD drivers!!!

---

<div class="post-metadata">

**Author:** ![DVD\_GR](https://avatars.discourse-cdn.com/v4/letter/d/ce7236/32.png) [@DVD\_GR](https://forum.zcashcommunity.com/u/DVD_GR)\
**Post date:** [December 9, 2016, 1:40pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1368 "2016-12-09T13:40:20Z")

</div>

and respective more power draw 😛

---

<div class="post-metadata">

**Author:** ![Qlio](https://avatars.discourse-cdn.com/v4/letter/q/b9e5f3/32.png) [@Qlio](https://forum.zcashcommunity.com/u/Qlio)\
**Post date:** [December 9, 2016, 2:12pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1369 "2016-12-09T14:12:43Z")

</div>

new crimson gave 20 sol each more ?!?!?!? 😮

---

<div class="post-metadata">

**Author:** ![BaldEagle](https://avatars.discourse-cdn.com/v4/letter/b/b5a626/32.png) [@BaldEagle](https://forum.zcashcommunity.com/u/BaldEagle)\
**Post date:** [December 9, 2016, 3:40pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1370 "2016-12-09T15:40:58Z")

</div>

new drivers and no change at all

---

<div class="post-metadata">

**Author:** ![trolloniex](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/trolloniex/32/2833_2.png) [@trolloniex](https://forum.zcashcommunity.com/u/trolloniex)\
**Post date:** [December 9, 2016, 3:53pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1371 "2016-12-09T15:53:51Z")

</div>

Furys are faster by 15-20 Sol/s let me test RX480 later today

---

<div class="post-metadata">

**Author:** ![BaldEagle](https://avatars.discourse-cdn.com/v4/letter/b/b5a626/32.png) [@BaldEagle](https://forum.zcashcommunity.com/u/BaldEagle)\
**Post date:** [December 9, 2016, 3:54pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1372 "2016-12-09T15:54:31Z")

</div>

rx 480 no change but the rejected shares got better

Did you install ReLive or only drivers?

---

<div class="post-metadata">

**Author:** ![LoveToMine](https://avatars.discourse-cdn.com/v4/letter/l/f17d59/32.png) [@LoveToMine](https://forum.zcashcommunity.com/u/LoveToMine)\
**Post date:** [December 9, 2016, 4:05pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1373 "2016-12-09T16:05:44Z")

</div>

In my case R9 380x and R9 290x the sol/s decrease from 160 → 155 sol/s and 255 → 248 sol/s with the newest driver

---

<div class="post-metadata">

**Author:** ![Dzonkarlo](https://avatars.discourse-cdn.com/v4/letter/d/13edae/32.png) [@Dzonkarlo](https://forum.zcashcommunity.com/u/Dzonkarlo)\
**Post date:** [December 9, 2016, 8:30pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1374 "2016-12-09T20:30:43Z")

</div>

I have a peculiar issue. Running claymore v9 and intensity 6, I have 3 XFX RX480 cards in one of my rigs where I have to run two of my cards with lower gpu clocks because when I have them running at the stock clocks the gpu temps rise to about 79c. Even if I run two cards at stock clocks, the card with the lower clocks heats up to 79c while the other cards are around 68-69c.

Has anyone run into this problem before.

---

<div class="post-metadata">

**Author:** ![Zorky](https://avatars.discourse-cdn.com/v4/letter/z/d07c76/32.png) [@Zorky](https://forum.zcashcommunity.com/u/Zorky)\
**Post date:** [December 9, 2016, 8:52pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1375 "2016-12-09T20:52:10Z")

</div>

How have you connected your PSUs?  
When I have a gpu problem I manged to get them running after several attempts.

> [@Reward campaign "Hunt for block" pool.northernminers.com this weekend](https://forum.zcashcommunity.com/t/reward-campaign-hunt-for-block-pool-northernminers-com-this-weekend/12621/4):
>
> nice slight_smile lets hops to find a block

---

<div class="post-metadata">

**Author:** ![786sam](https://avatars.discourse-cdn.com/v4/letter/7/dc4da7/32.png) [@786sam](https://forum.zcashcommunity.com/u/786sam)\
**Post date:** [December 9, 2016, 11:03pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1376 "2016-12-09T23:03:09Z")

</div>

Is the with relive drivers?

---

<div class="post-metadata">

**Author:** ![trolloniex](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/trolloniex/32/2833_2.png) [@trolloniex](https://forum.zcashcommunity.com/u/trolloniex)\
**Post date:** [December 10, 2016, 12:53pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1377 "2016-12-10T12:53:42Z")

</div>

Yes sir it is (20 char)

---

<div class="post-metadata">

**Author:** ![trolloniex](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/trolloniex/32/2833_2.png) [@trolloniex](https://forum.zcashcommunity.com/u/trolloniex)\
**Post date:** [December 10, 2016, 12:54pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1378 "2016-12-10T12:54:08Z")

</div>

Use a custom fan profile…

---

<div class="post-metadata">

**Author:** ![Stealth8368](https://avatars.discourse-cdn.com/v4/letter/s/47e85d/32.png) [@Stealth8368](https://forum.zcashcommunity.com/u/Stealth8368)\
**Post date:** [December 10, 2016, 2:25pm UTC](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114/1379 "2016-12-10T14:25:01Z")

</div>

Running your cards at 79 c is perfectly fine,if you are concerned raise your fan speeds but your current temps are not a problem

[Previous page](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114.md?page=67)

[Next page](https://forum.zcashcommunity.com/t/miner-claymores-zcash-miner/7114.md?page=69)
