# Mining with flypool

**URL:** <https://forum.zcashcommunity.com/t/mining-with-flypool/7229>\
**Category:** Technical Support\
**Created:** [November 5, 2016, 4:15am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229 "2016-11-05T04:15:18Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Freshbru](https://avatars.discourse-cdn.com/v4/letter/f/a88e4f/32.png) [@Freshbru](https://forum.zcashcommunity.com/u/Freshbru)\
**Post date:** [November 5, 2016, 4:15am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/1 "2016-11-05T04:15:18Z")

</div>

I have been trying to join flypool for half the day with no luck.  
I installed everything like it says on their github page for linux cpu mining, but here is what happens:

"open terminal.

cd nheqminer

./nheqminer -l [eu1-zcash.flypool.org:3333](http://eu1-zcash.flypool.org:3333) -u t1cX6oqQY1wd8FQCyW9YJyRSh3Qyt3Ymetm.rig1"

bash: ./nheqminer: is a directory."

After I reinstalled it, I could see that it builds to home/user/nheqminer/Linux\_cmake/nheqminer\_cpu as shown in the picture, but I don’t know what to do next to get it running.  
[http://imgur.com/OHaYoxE](http://imgur.com/OHaYoxE)

Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![hongfxhp](https://avatars.discourse-cdn.com/v4/letter/h/df788c/32.png) [@hongfxhp](https://forum.zcashcommunity.com/u/hongfxhp)\
**Post date:** [November 5, 2016, 4:34am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/2 "2016-11-05T04:34:07Z")

</div>

I also got same error but now also not resolve problem. Could any one help???

---

<div class="post-metadata">

**Author:** ![bio](https://avatars.discourse-cdn.com/v4/letter/b/919ad9/32.png) [@bio](https://forum.zcashcommunity.com/u/bio)\
**Post date:** [November 5, 2016, 5:01am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/3 "2016-11-05T05:01:01Z")

</div>

try  
cd nheqminer/nheqminer  
./nheqminer…follow your correct string  
basically, there is nheqminer folder inside nheqminer folder (don’t ask me why)

Also,  
do you want to mine with GPU or CPU?  
for cpu your pict shows that you are in correct directory, but your string for the pic should have been:  
./nheqminer\_cpu -l [us1-zcash.flypool.org:3333](http://us1-zcash.flypool.org:3333) -u youraddress.cpu1 -t “number of threadsinyourcpuminus2”

so for 8 thread cpu -t 6

---

<div class="post-metadata">

**Author:** ![Freshbru](https://avatars.discourse-cdn.com/v4/letter/f/a88e4f/32.png) [@Freshbru](https://forum.zcashcommunity.com/u/Freshbru)\
**Post date:** [November 5, 2016, 5:23am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/4 "2016-11-05T05:23:35Z")

</div>

Thanks bio, but I found out what the issue was.

:FIXED:  
When you install the linux cpu miner for flypool, it builds the application to home/user/nheqminer/Linux\_cmake/nheqminer\_cpu

From there all you have to do is type the command like the example they give you  
Start your miner using the following command. Use your Zcash address as username (can be a t address)

Full example

./nheqminer\_cpu -l [us1-zcash.flypool.org:3333](http://us1-zcash.flypool.org:3333) -u t1cX6oqQY1wd8FQCyW9YJyRSh3Qyt3Ymetm.rig1"

---

<div class="post-metadata">

**Author:** ![hongfxhp](https://avatars.discourse-cdn.com/v4/letter/h/df788c/32.png) [@hongfxhp](https://forum.zcashcommunity.com/u/hongfxhp)\
**Post date:** [November 5, 2016, 8:19am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/5 "2016-11-05T08:19:39Z")

</div>

Hi Bio

I already do it but still got diretory not found, if i change command with nheqminer … without ./ then got error command not found, could you please help???

---

<div class="post-metadata">

**Author:** ![bio](https://avatars.discourse-cdn.com/v4/letter/b/919ad9/32.png) [@bio](https://forum.zcashcommunity.com/u/bio)\
**Post date:** [November 6, 2016, 1:51am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/6 "2016-11-06T01:51:01Z")

</div>

just use ./  
why not?

---

<div class="post-metadata">

**Author:** ![cryptomined](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/cryptomined/32/3789_2.png) [@cryptomined](https://forum.zcashcommunity.com/u/cryptomined)\
**Post date:** [November 6, 2016, 1:53am UTC](https://forum.zcashcommunity.com/t/mining-with-flypool/7229/7 "2016-11-06T01:53:50Z")

</div>

ok guys follow this tutorial, i will be deleting it later today and replacing it with one with better audio  
so hope it helps

https://www.youtube.com/embed/Y6zU78xLlnA?feature=oembed&wmode=opaque