# Problems with GTX 1080ti

**URL:** <https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058>\
**Category:** Mining\
**Created:** [October 2, 2017, 9:41pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058 "2017-10-02T21:41:18Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![fbe](https://avatars.discourse-cdn.com/v4/letter/f/8c91f0/32.png) [@fbe](https://forum.zcashcommunity.com/u/fbe)\
**Post date:** [October 2, 2017, 9:41pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/1 "2017-10-02T21:41:18Z")

</div>

Hello, I’have only about 2 month mining and last week I had a problem.  
I just wanted to see if someone can help me please. Bear in mind, I’m not a pc-pro.

I purchased a new GPU (EVGA GTX1080ti SC Black Edition) and a PSU (EVGA 750BQ) to go with my old PC.  
Did a clean fresh WIN 10 install.

Everything went fine for the first 6 week but after I did turn-off the PC, the day after it started to reset by itself constantly.  
After 4-5 hours of mining the pc restarted alone. No sound no nothing. In the mean time purchased a set of GPU risers, so I wanted to try them. At this point I checked the termal paste.

When I did turn on the PC with the riser pluged (molex to 6pin) everything was ok. No motherboard sound, HMDI signal fine to the monitor but the moment I opened the bat file it started to make a loud and continuos Beep and when I closed the program it stoped.

I removed the reiser and connected the GPU directly to the 1x16 slot as it was originally and it did the same thing.

I tryed with 2 differents motherboards, and nothing changed.

Reading throug the internet, I was hopping that it was the PSU (even as new) so I replaced it today with a CoolerMaster 550w I bougth a few years back, but it made the same noise again and again. With or without riser.

How can I check what’s wrong ? It could be the GPU ?  
I don’t understand why it is making this even if I take it to the first configuration that worked really fine (620/750 sol/s) at my very first attemp for 6 weeks long.

Thanks in advance for your time and help.

---

<div class="post-metadata">

**Author:** ![totaln00b](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/totaln00b/32/8029_2.png) [@totaln00b](https://forum.zcashcommunity.com/u/totaln00b)\
**Post date:** [October 2, 2017, 9:51pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/2 "2017-10-02T21:51:39Z")

</div>

how are you powering the EVGA GTX1080ti SC Black Edition

---

<div class="post-metadata">

**Author:** ![fbe](https://avatars.discourse-cdn.com/v4/letter/f/8c91f0/32.png) [@fbe](https://forum.zcashcommunity.com/u/fbe)\
**Post date:** [October 2, 2017, 10:03pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/3 "2017-10-02T22:03:52Z")

</div>

With the 8pin + 6pin connector directly from the PSU.  
I tryed to change it with another 8+6 pin but to the VGA and Periferial connection on the PSU.

It was the same.

---

<div class="post-metadata">

**Author:** ![totaln00b](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/totaln00b/32/8029_2.png) [@totaln00b](https://forum.zcashcommunity.com/u/totaln00b)\
**Post date:** [October 2, 2017, 10:46pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/4 "2017-10-02T22:46:02Z")

</div>

im not entirely sure but it could be the psu…  
what cpu you got running, are you using a stock cpu cooler?  
what motherboard etc…?

---

<div class="post-metadata">

**Author:** ![CitricAcid](https://avatars.discourse-cdn.com/v4/letter/c/cc9497/32.png) [@CitricAcid](https://forum.zcashcommunity.com/u/CitricAcid)\
**Post date:** [October 3, 2017, 3:03am UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/5 "2017-10-03T03:03:12Z")

</div>

> [@fbe](#):
>
> At this point I checked the termal paste.

What do you mean that you checked the thermal paste? on what? the GPU or the CPU

---

<div class="post-metadata">

**Author:** ![johnwisdom](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/johnwisdom/32/5836_2.png) [@johnwisdom](https://forum.zcashcommunity.com/u/johnwisdom)\
**Post date:** [October 3, 2017, 6:55am UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/6 "2017-10-03T06:55:31Z")

</div>

> if 1 beep its - video card  
> if 2 to 3 beeps - RAM  
> if it beeps continuously - its the processor

---

<div class="post-metadata">

**Author:** ![fbe](https://avatars.discourse-cdn.com/v4/letter/f/8c91f0/32.png) [@fbe](https://forum.zcashcommunity.com/u/fbe)\
**Post date:** [October 3, 2017, 9:19pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/7 "2017-10-03T21:19:31Z")

</div>

I tried 4 diferent settings:

1. the original (which worked fine) was with: EVGA 750w PSU + Gigabyte GA-880GM-USB3 motherboard + AMD Athlon II +2GG ram.
2. An old IBM Core Duo with the riser and the same EVGA 750w PSU.
3. Another Gigabyte GA-770T-USB3 motherboard + AMD Athlon III with + EVGA 750w PSU
4. the original setup + CoolerMaster 550w that worked with the GA-770T as my home pc with any kind of problem.

What remain the same was the 1080ti and the hard-drive with the brand new Win10 that worked fine.  
And the beep is loud and continuos one that start and end when you start/close the miner.

For termal-paste I was refering to the CPU, as it was never changed after 5-6 years and seeing that now the computer was on for 24/7 and restarting itself.

It is not as it is suffering for coil whine nor similar, but if I did connect something wrong it shouldn’t even work or passing signal to the monitor right ?

I don’t have any 3rd PSU to check, but was hoping that changing it for the old one, it would stop beeping.

How can I check if there is something wrong with the GPU ? Could it been damage by some kind of static electricity ?

thanks to all 3 of you.

---

<div class="post-metadata">

**Author:** ![krasher](https://avatars.discourse-cdn.com/v4/letter/k/2acd7d/32.png) [@krasher](https://forum.zcashcommunity.com/u/krasher)\
**Post date:** [October 3, 2017, 10:40pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/8 "2017-10-03T22:40:21Z")

</div>

i had a similar experience , luckily i have 11 rigs so i had the chance to borrow a part from one to confirm what is wrong. Powersupply was the issue, if you havent tried that then you should give it a go.

---

<div class="post-metadata">

**Author:** ![fbe](https://avatars.discourse-cdn.com/v4/letter/f/8c91f0/32.png) [@fbe](https://forum.zcashcommunity.com/u/fbe)\
**Post date:** [October 4, 2017, 1:48pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/9 "2017-10-04T13:48:11Z")

</div>

I tried with 2 different PSU and was the same.

If I should purchase another PSU what would you recomend ? Seen that the one i bought didn’t last 2 months.  
I don’t plan to go with 6 GPU, but it’s on the way a RX580.

I was looking to buy the: Corsair Builder Series CX750M / Cooler Master G750M

---

<div class="post-metadata">

**Author:** ![totaln00b](https://sea2.discourse-cdn.com/zcash/user_avatar/forum.zcashcommunity.com/totaln00b/32/8029_2.png) [@totaln00b](https://forum.zcashcommunity.com/u/totaln00b)\
**Post date:** [October 4, 2017, 8:09pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/10 "2017-10-04T20:09:13Z")

</div>

maybe dont get a bronze power supply… i mean they technically should work but id recommend a gold at least.

---

<div class="post-metadata">

**Author:** ![fbe](https://avatars.discourse-cdn.com/v4/letter/f/8c91f0/32.png) [@fbe](https://forum.zcashcommunity.com/u/fbe)\
**Post date:** [October 4, 2017, 9:07pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/11 "2017-10-04T21:07:01Z")

</div>

even in the case I plan to undervolt them to 60% ?

---

<div class="post-metadata">

**Author:** ![fbe](https://avatars.discourse-cdn.com/v4/letter/f/8c91f0/32.png) [@fbe](https://forum.zcashcommunity.com/u/fbe)\
**Post date:** [October 19, 2017, 7:48pm UTC](https://forum.zcashcommunity.com/t/problems-with-gtx-1080ti/22058/12 "2017-10-19T19:48:27Z")

</div>

Hi,

Well, I took the GPU to a friend’s house and instaled it on his computer and it worked fine. I asked him if I could borrow his PSU and test the mining rig in my office, he agreed and when I changed the PSU in the office the computer started to make the same noice !!! I couldn’t belevie it.

At this point, the only thing that cross my mind was “the electricity plug has to be the problem (in some way)”. I connected the mining rig directly to the wall avoiding the surge protection we have, and the problem was solved.

Thanks to all who tried to help !
