# R9 fury x problem
**URL:** https://forum.zcashcommunity.com/t/r9-fury-x-problem/13241
**Category:** Technical Support
**Created:** [December 29, 2016, 12:49pm UTC](https://forum.zcashcommunity.com/t/r9-fury-x-problem/13241 "2016-12-29T12:49:30Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@786sam](https://forum.zcashcommunity.com/u/786sam)
#### Post date: [December 29, 2016, 12:49pm UTC](https://forum.zcashcommunity.com/t/r9-fury-x-problem/13241/1 "2016-12-29T12:49:30Z")
So my fury x does not get recognised no matter how i connect it… iv seen a little green light that stays constantly on need the power inlet. There is a number below it _d4002_
I then decided to open the back cover and do some inspection. I found a guide where you can use the paper clip trick
> **[Bricked your RX 480 due to bad flash?](https://wayback.archive-it.org/16516/20210620192432/https://forum.ethereum.org/discussion/9443/bricked-your-rx-480-due-to-bad-flash)**
>
> Hey y'all, In my latest bios flash endeavor, I managed to brick all my Sapphire RX 480 8b Ref cards at the same time. Note to self:
That seemed to make the gpu spin with some force but still couldnt detect anything… anything else i could try?
---
### Author:  [@Ivcelmik83](https://forum.zcashcommunity.com/u/Ivcelmik83)
#### Post date: [December 29, 2016, 2:46pm UTC](https://forum.zcashcommunity.com/t/r9-fury-x-problem/13241/2 "2016-12-29T14:46:01Z")
When u try the mettod with paper clip u must have another card in the system beside Fury so the system boot from the other card and then after system boot u remove the paper clip,but I know that Fury has dual bios so u should change to bios B
---
### Author:  [@786sam](https://forum.zcashcommunity.com/u/786sam)
#### Post date: [December 30, 2016, 11:54am UTC](https://forum.zcashcommunity.com/t/r9-fury-x-problem/13241/4 "2016-12-30T11:54:27Z")
Please delete card is now sold