# Ubuntu Troubleshooting to run Zcash Miner with 7 gpu

**URL:** <https://forum.zcashcommunity.com/t/ubuntu-troubleshooting-to-run-zcash-miner-with-7-gpu/20701>\
**Category:** Mining\
**Created:** [August 21, 2017, 10:53pm UTC](https://forum.zcashcommunity.com/t/ubuntu-troubleshooting-to-run-zcash-miner-with-7-gpu/20701 "2017-08-21T22:53:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![gandotratushar](https://avatars.discourse-cdn.com/v4/letter/g/a9a28c/32.png) [@gandotratushar](https://forum.zcashcommunity.com/u/gandotratushar)\
**Post date:** [August 21, 2017, 10:53pm UTC](https://forum.zcashcommunity.com/t/ubuntu-troubleshooting-to-run-zcash-miner-with-7-gpu/20701/1 "2017-08-21T22:53:38Z")

</div>

I have just started with Linux Rig and have been hit by series of problems …I would like to start a forum where I will maintain all the common errors for Ubuntu which will be solved here…

My first tip I found while installing Linux.

Q) My wifi isn’t getting connected when I first install Ubuntu 17  
A) This can sometime happen with usb wifi modules . To fix this edit  
/etc/NetworkManager/NetworkManager.conf

add

[device]  
wifi.scan-rand-mac-address=0

This should fix the wifi issue. That is why the recommended option is always a lan cable.

---

<div class="post-metadata">

**Author:** ![gandotratushar](https://avatars.discourse-cdn.com/v4/letter/g/a9a28c/32.png) [@gandotratushar](https://forum.zcashcommunity.com/u/gandotratushar)\
**Post date:** [August 22, 2017, 7:29am UTC](https://forum.zcashcommunity.com/t/ubuntu-troubleshooting-to-run-zcash-miner-with-7-gpu/20701/2 "2017-08-22T07:29:55Z")

</div>

I am stuck at setting coolbits for cards. Things works fine with 1 card but as soon as the cards increased, it stops. Here is what I have tried so far:

1. adding nogpumanager crashes the system and have to revert changes to start
2. Chattr +i xorg.conf gets the same crash
3. xorg is always rewritten at start

I have 1080Ti HerculeZ from Inno3D and ubuntu17.04/Lubuntu17.04

Are there any steps to set coolbits for all the cards so all the gpus can accept the commands for Fanspeed etc?

TIA

---

<div class="post-metadata">

**Author:** ![noobvie](https://avatars.discourse-cdn.com/v4/letter/n/9d8465/32.png) [@noobvie](https://forum.zcashcommunity.com/u/noobvie)\
**Post date:** [August 22, 2017, 3:53pm UTC](https://forum.zcashcommunity.com/t/ubuntu-troubleshooting-to-run-zcash-miner-with-7-gpu/20701/3 "2017-08-22T15:53:27Z")

</div>

Honestly, I recommend to use Windows 10 coz there will be more troubleshoots afterward…

---

<div class="post-metadata">

**Author:** ![gandotratushar](https://avatars.discourse-cdn.com/v4/letter/g/a9a28c/32.png) [@gandotratushar](https://forum.zcashcommunity.com/u/gandotratushar)\
**Post date:** [August 23, 2017, 4:35am UTC](https://forum.zcashcommunity.com/t/ubuntu-troubleshooting-to-run-zcash-miner-with-7-gpu/20701/4 "2017-08-23T04:35:04Z")

</div>

I have windows Rig already working. I want to convert all of them to Linux if I can make it work. After 2 days of fiddling we went with windows again but I still feel it should be Linux on all the machines for better stability …
