# Zcash mining is running But nothing show on Dashboard
**URL:** https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662
**Category:** Technical Support
**Created:** [July 5, 2017, 1:36pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662 "2017-07-05T13:36:09Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@valvet](https://forum.zcashcommunity.com/u/valvet)
#### Post date: [July 5, 2017, 1:36pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662/1 "2017-07-05T13:36:09Z")
Hi,
Got a lil problem here. Claymore running fine, with no problem ( Share accepted/New job and so on) But nothing show on the flypool Dashboard. No hashrate/ no worker nothing…
tadresse is good.
Any insight?
---
### Author:  [@nekkidtruth](https://forum.zcashcommunity.com/u/nekkidtruth)
#### Post date: [July 5, 2017, 2:12pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662/2 "2017-07-05T14:12:58Z")
Make sure you have set up your config or bat file correctly. It should be as follows:
`ZecMiner64.exe -zpool ssl://us1-zcash.flypool.org:3443 -zwal walletaddress.workername -zpsw x`
Depending on your location you may want to change **us1-zcash** to something closer.
---
### Author:  [@valvet](https://forum.zcashcommunity.com/u/valvet)
#### Post date: [July 5, 2017, 3:08pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662/3 "2017-07-05T15:08:06Z")
Yep already have… anything elesE?
---
### Author:  [@nekkidtruth](https://forum.zcashcommunity.com/u/nekkidtruth)
#### Post date: [July 5, 2017, 3:22pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662/4 "2017-07-05T15:22:48Z")
How long ago did you start? Are you checking the correct address when you’re checking on Flypool?
---
### Author:  [@valvet](https://forum.zcashcommunity.com/u/valvet)
#### Post date: [July 5, 2017, 3:38pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662/5 "2017-07-05T15:38:57Z")
Resolved, a # was missing in config…
Thx
---
### Author:  [@Crypto\_doggie](https://forum.zcashcommunity.com/u/Crypto_doggie)
#### Post date: [February 21, 2018, 8:00pm UTC](https://forum.zcashcommunity.com/t/zcash-mining-is-running-but-nothing-show-on-dashboard/18662/6 "2018-02-21T20:00:38Z")
Where were you missing # im having same problem