[CMD] FarmWatchBot (Autorun/Watchdog) for Ewbf, Claymore, Dstm, CCminer, Bminer, Ethminer, CastXMR, Phoenix, T-Rex, Gmnr, NB

Mining
157
  1. use “–time” in miner command
    Please read carefully and not need to hurry. I writed in config.bat “keep default oder” it means to not change position of parameters and do not remove them. I put them not because i just want it. I put them because they are needed. Thx!
  2. why computer was not restarded?
2 Likes
159

I encountered an issue today. This was not the newest build, but one I downloaded a couple of weeks. I got an email from Flypool that one of my workers were offline, and I went to check the miner. I didn’t note the exact message in the Autostart window, but it told me that the server had changed. I then went to look in the miner.bat-file, and there was an unknown wallet address.

I then went to check the config.bat-file, and both the primary and additional server was correctly configured with my own credentials. What kind of fallback mechanism is this, that the script suddenly changes to mine on a different address (yours, I presume)? Restarting the autostart.bat manually reverted everything back to normal.

3 Likes
160

Hello. In the code there are 8 mentions of my wallet. 1 - in the code cap, 5 - in the configuration file, 2 - as a function. The function works only when the main pool and 4 additional pools, in turn, did not respond to the request and are offline. Every 30 minutes, the script checks the order of the pools on the online and switches by priority and the ability to first to the main and then from 2 to 5. My pool is not in the priority and will be selected last. 5 pools offline - this is a very rare phenomenon.

So you can catch this in 2 cases:

  1. you use as main and additional server same pool,
  2. all your 5 different pools was offline.

Please always use latest version and check your notifications in time.
Thank you and sorry for that.

4 Likes
161

I gave it a go with EWBF and DSTM both working but after a few hours again they failed at restarting and get into a loop. I am not sure what is causing it and since DSTM was already working fine for me with out the autorun I will just go back to it. Sorry!

162

What loop? What error? Why your computer not restarting?
Ok, no problem, it is your choice.
But please give me answers, i want to fix that.
What is your OS?
Thx!

2 Likes
163

The error below loops again and again, it was because I have computer restart every 12 hours and miner restart every 2 hours and was not liking it, Also the overclokcing directory was wrong since i dont have much space in my C:\ drive I have to edited manually, I am trying something differently which mean I am meddling with you autorun code, its running normally now, but I would like to reduce the 12 hour restart for the pc for every 6 hours, since I have only 2gb on my graphics card i think the cache fills up rather quickly. or maybe not!

I am using Windows 10 x64

[miÐ. 01.11.2017][ 7:07:16] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:07:28] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:08:03] Miner restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:08:34] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:08:46] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:00.
[miÐ. 01.11.2017][ 7:09:21] Miner restarting… Miner ran for 00 d. 00:00.
[miÐ. 01.11.2017][ 7:09:52] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:10:04] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:10:39] Miner restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:11:10] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:11:22] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:11:57] Miner restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:12:28] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:12:40] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:13:15] Miner restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:13:46] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:13:58] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:00.
[miÐ. 01.11.2017][ 7:14:33] Miner restarting… Miner ran for 00 d. 00:00.
[miÐ. 01.11.2017][ 7:15:04] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:15:16] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:15:51] Miner restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:16:22] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:16:34] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:17:09] Miner restarting… Miner ran for 00 d. 00:01.
[miÐ. 01.11.2017][ 7:17:43] Miner was started. v.1.7.4.
[miÐ. 01.11.2017][ 7:17:55] Too many errors. A restart of the computer to clear GPU cache is required. Restarting… Miner ran for 00 d. 00:00.
[miÐ. 01.11.2017][10:45:33] Process zm.exe was successfully killed.

1 Like
166

Today version 1.7.6 released!

Changelog:

  • Telegram commands are better otimised now.
  • Some Telegram messages corrected or removed.
  • The temperatures, which are higher, than 70°C are marked by bold font in Telegram report.
  • Servers are now counting from 1 till 5, not like before, from 0 - 4.
  • Option “EnableTelegramNotifications” is removed. To enable Telegram notifications you just need to add your ChatID.
  • For full automatisation all actions, which before were requesting user’s input, are equipped with timer, so, and it is Y by default now. It should fix all problems for Win 7 users.
  • An option to disable 0 Sol/s error in autorun.bat (cap config) added.
  • An online status algorithm changed to new one, because previous 1.7.4 algorithm version had been overloading my server. (The main reason to update)
  • From this version the RigName by default = your PC name.
  • Changed UI, added current rig information on display.
  • Errors algorithm completely reworked, from now the cycle time is 9 sec. (Not 13 as it was before in version 1.7.5, or 21 as it was in version 1.7.1).
  • Improved all algorithms for all miners (Claymore, Ewbf, Dstm).
  • Fixed loop and crash autorun.bat errors.
  • Added debug.log.
  • Many other little features.
  • Cosmetic changes.

Ewbf 0.3.4 version
Claymore 12.6 version
Dstm 0.5.4 version

Please do not forget about LIKEs :slight_smile:

Russian language

Список изменений:

  • Команды Telegram теперь лучше отимизированы.
  • Некоторые сообщения Telegram исправлены или удалены.
  • Температура, превышающая 70 ° C, выделяется жирным шрифтом в отчете Telegram.
  • Серверы теперь считаются от 1 до 5, а не как раньше, от 0 до 4.
  • Опция «EnableTelegramNotifications» удалена. Чтобы включить уведомления Telegram, вам просто нужно добавить свой ChatID.
  • Для полной автоматизации все действия, которые раньше запрашивали ввод пользователя, снабжены таймером, поэтому, по умолчанию это Y. Он должен исправить все проблемы для пользователей Win 7.
  • Добавлена ​​опция отключения 0 Sol/s error в файле autorun.bat (конфиг вверху файла).
  • Алгоритм онлайн-статуса был изменен на новый, поскольку предыдущая версия алгоритма 1.7.4 перегружала мой сервер. (Основная причина обновления)
  • Начиная из этой версии RigName по умолчанию = имя вашего ПК.
  • Изменен пользовательский интерфейс, добавлена ​​текущая информация о ферме на табло.
  • Алгоритм ошибок полностью переработан, теперь время цикла составляет 9 секунд. (Не 13, как это было раньше в версии 1.7.5, или 21, как это было в версии 1.7.1).
  • Улучшены все алгоритмы для всех майнеров (Claymore, Ewbf, Dstm).
  • Исправлены ошибки цикла и ошибки автозапуска.
  • Добавлен debug.log.
  • Многие другие мелочи.
  • Косметические изменения.

Ewbf 0.3.4 version
Claymore 12.6 version
Dstm 0.5.4 version

4 Likes
167

Is ccminer on the support roadmap? :slight_smile:

3 Likes
168

Yes ccminer next. I hope will start working on it from Monday.

3 Likes
169

Great job, Undertrey (aka Acrefawn)!

Can you please add API on/off setting for EWBF?
For example - at the startup detect IP of Rig(Computer), and in case API setting is “1” - add --api XXX.XXX.XXX.XXX:42000 (self-detected IP) to the miner.bat comment.

Is this feasible?
Thanks again!

3 Likes
170

Hello! Thank you for reply and this idea, sounds good, will think about it!

2 Likes
171

the best script. stability, simplicity… what more do you need?
thank you and low bow

3 Likes
172

This isn’t on Linux… Which means for users with more than 8 card rigs it won’t work.

3 Likes
173

I thought that this script is for windows only

3 Likes
174

Only for Windows ATM. It is possible to run 12 GPUs on Windows. So 8 it is not a problem too.

2 Likes
175

Thank you very much!

3 Likes
176

Windows doesn’t support 12 nvidia cards.

3 Likes
177

photo_2017-11-10_21-57-17
photo_2017-11-10_21-57-17984×517 59.7 KB
photo_2017-11-10_21-59-14

i think +1 it is not a problem

2 Likes
178

Have you tried it? I could not get 12x 1080ti to work in Windows 10 Pro and tried almost everything. Are those all NVIDIA/1080tis?

3 Likes
179

On first message you wrote about 8+ cards
then about 12 nvidia
now about 12 nvidia 1080ti
:smiley:
what next? :slight_smile:

You can see hashrate, this is 1060, but 11 nvidia can work on WIN10 with no problems, i think 1080TI too.
I gave screenshot for you, this is not a photoshop lol :smiley:

2 Likes