This is exactly what I’m getting with my RX 470s.
ok I still cant get it to run on claymore. I did however get it to run on nheqminer_0.3a by adding -op 1 . Any ideas on how to get this going on claymore.
Claymore 
“I will release new version in a few hours.”
1 Like
Which from reading his comments will do 300 sols on older 390 cards but only 200 ish on 480 cards… Fury may see a slight improvement.
Will see…
1 Like
Whoooaaa, v8 is out! 15% improvement for my 280x, now reaching magical 200 sols on stock clocks, and only +0.25% power consumption!
Thank you Claymore!
Could somebody post hashrate for r9 390, r7 370 on stock for new claymore?
I don’t have one, but on another forum they saying 390x getting 300 sols on default settings. So maybe 270+ for a 390?
390 = 285 sols
390x = 310 sols
480 = 210 sols
i only get about 100 H/S on 7970 (280x equilavent). I don´t use risers and my ram is ddr 16gb. What do i do wrong? 
Windows version? Driver?
190 sols on 480 with newest version
Claymore v8.0 133sol/s @ 170 Wh
It is not stable even on - i 4 for me. It always hangs with no error message and I have to press S for the miner to continue.
When I press S it shows a bunch of stale shares.
When it works
Rx 470 4G - 175 sols/s (Stock bios, 1225 mhz core, 1750 mem)
Rx 480 8G - 190 sols/s (1750 mem strap bios, 1225 core, 2060 mem)
218 Sol/s MSI R7950 1178/1500 1.2V
194 RX480
310 Fury X
273 Fury
What configuration do you have ? OS, Driver, is your OS fresh installed ?
BTW is stable with Clay v6 ?
What for PSU do you have ?
1 Like
2 x 1000W EVGA SuperNOVA G1
1 Like
sapphire nitro rx470 4gb ~160H/s; moded bioses for eth (28,2MH/s); hynix memory