Are you overclocking your 390?
With the STOCK FACTORY BIOS on 470 4GB.
- k zec OR -k zec zec
EXACT SAME HASHRATE.
Win 7 16.10 drivers
No overclock
Stock bios
You just gotta loop it then. Some cards just crash for no reason.
Are you running -k zec zec ? IF so remove it and just run 1 thread.
Running with default settings .bat
Problem I have got from yesterday.
Before yesterday it was fine.
over night i had 3 rigs running.2 on nano and 1 on fly. this morning the 2 on nano were satill going. the fly one crapped out an hour after i went to bed
What driver are you using? 16.10? Maybe try 15.14 or 15.7, it should work on your card and might be more stable.
Guys do we really need to restart the miner every 10 or 15 min?
value for 5 gpus? 
Yup… There is a powershell script that works pretty well although I’ve customized it also to restart the miner after 1000 submitted shares
Are you adding up both totals from both threads? Look at the pool total after 2-3h.
I would guess if ($global:countstr -gt 25) 
There are no totals, its like this
zconn submitted and accepted.
zec-sa#0 submitting solution
zconn submitted and accepted.
zec-sa#0: 29.4S/s zec-sa#1: 24.8S/s zec-sa#2: 23.6S/s total: 77.8S/s
zec-sa#2 submitting solution
zconn submitted and accepted.
zec-sa#0: 24.8S/s zec-sa#1: 26.4S/s zec-sa#2: 24.4S/s total: 75.6S/s
zec-sa#2 submitting solution
And yes it loads 6 kernels. Unless im suppost to be using version 5
So your new totalt is then 77.8 + 75.6.
They both run in parallell. Verify on the pool.
I am guessing you get around 90-100 when just using zec once (one process)?
No, the pool speed is identical.
I dont think 50H/s with would possible with a 470.
It is possible. Check SILENTARMY. But the pool usually takes a couple of hours to show new speed. What pool are you using?
The powershell script is best working solution.
For unknown reason on one of my machines it closes itself from time to time, so I added a check which restarts the powershell script if it dies
NH is the name of shortcut that starts powershell script:
powershell monitor_restart.ps1
the batfile checks if genoil.exe is in task list, if not, starts again the powershell
[quote]@echo off
echo starting miner
:loop
echo Starting at:
time /t
start /MIN NH
:loop2
timeout /T 10 /NOBREAK >nul
echo 10 sec
tasklist | find /c “genoil.exe” > nul
if “%ERRORLEVEL%”==“0” goto loop2
echo Error
goto loop[/quote]
Still… proper way is if miners don’t crash… watching the watcher that watches the miner is too complicated
1 Like
Nicehash, usually takes 5 mins for an accurate speed.
Do some testing and let me know.
I think that is what is supposed to happen. The individual rates drop like 30-40% but the totalt hashrate goes up 60-70% when you add them together.
Same with zogminer+SILENTARMY.
Mind share your script again Hotmetal?
This forum is such a mess, without page number so hard to navigate