Miner- Nicehash EQM

Running 2 threads crashed my miner. Though that could be because of the clock settings. 1 thread seems fine.

Greetings to your work,save my N card.Can you optimize GTX1080? It works slower than 1070,beacuse of DDR5X memory? Thanks

Will give it a try once I get home.
I’m interested if it will be better than my current 120 sol/s on GTX 1070 with this one: Miner- CUDA Equihash (with devfee) - #336 by banana771

with 1.0.1a if i run 2 instances it increased from 115 to 118, in 1.0.1b running 2 instances stay at 115…
btw -cd 0 0 doing:
[14:45:53][0x000016bc][info] net | Share with id 15 accepted
[14:45:56][0x000016bc][info] net | Share with id 16 accepted
[14:45:57][0x000016bc][info] net | Share with id 17 accepted
[14:45:57][0x00001560][info] =====> 61.0915 I/s, 115.348 Sols/s
[14:45:57][0x00001560][info] Accepted: 17.943 /m Rejected: 0 /m
[14:45:58][0x00001084][error] miner#0 | CUDA error ‘unspecified launch failure’ in func ‘eq_cuda_context::solve_sync’ line 1563
[14:45:58][0x00000c68][error] miner#1 | CUDA error ‘unspecified launch failure’ in func ‘eq_cuda_context::solve_sync’ line 1528
[14:45:58][0x00001084][error] miner#0 | CUDA error ‘unspecified launch failure’ in func ‘eq_cuda_context::~eq_cuda_context’ line 1667
[14:45:58][0x00000c68][error] miner#1 | CUDA error ‘unspecified launch failure’ in func ‘eq_cuda_context::~eq_cuda_context’ line 1667
[14:45:58][0x00001084][warning] miner#0 | Thread detected runtime error, restarting in 5 seconds…
[14:45:58][0x00000c68][warning] miner#1 | Thread detected runtime error, restarting in 5 seconds…

Is your card overclocked? That error went away after i reduced my overclock on my 750ti

I always overclock my card, and always is stable, “a” version run in 2 instances without problems

I have this issue aswell when running 2 instances.

Titan X Pascal with a +700 memory offset i can manage 165sols not bad at all @ 175 watts

Does memory speed effect sol rate or core speed?

@darky1 memory speeds seem to have the highest effect.

I know memory timings had an effect on AMD cards but didn’t know it had much effect on nvidia cards. I thought core speed was more important.

when you see that card use only 40% of memory bus and overclocking memory give big gain you start think that code is not good optimized. Looks like cores waiting for data transfer, and no transfer is when cores working… thats is why gpu load is 100% but it use only 80% of power, it is waiting… They should optimize by fetchin from memory to local cache when cores still working on old data

Well I just messed around with the speeds on this 750ti and got some interesting results. Upped the memory by +650 and put the core down to default and sol rate dropped to 30.

Upped the core by +250 and memory +650 and now getting a solid 37.5 - 38 sol.

This poor little 750ti has been hammered every second of its life!

1 Like

what if we just want to mine ZEC with it? can you lock it to your pool?

EVGA GTX 1070 Founders edition
+180MHz on core
+550MHz on memory

127-130 sol/s (most of the time at 129)
Power usage at 70%, so around 105W.

Too bad it’s locked only to NiceHash.
Was hoping it would work with pool.mn so I can acctually keep my ZEC or ZCL.

Can you mine https://zcash.nicehash.com/ with this miner ?

is that 9ghz memory?

if I’m not mistaken it’s 8700MHz
in Precision X it’s saying 4350.

For Nvidia just double the memory that afterburner/gpuz shows.

hasrate is good but so many rejects… connected to eu location.is it fine now?