I tried to download 0.3.5 for windows theres linux only
1 Like
I canāt seem to get the GPU to work with this minerā¦ 0.3a for Windows.
The GPU goes to approx 9% load and stays there when i run the program. And 0 sols/s.
Iāve tried both with or without CPU (which works fine btw) and itās the same results.
This is the command line: nheqminer.exe -l usa -u 15xoQbszYhvmB9zYHsDAsNYL5r9LR7cWUG.WorkerX -t 6 -cd 0
Anyone knows why this might be?
Iāve got a Zotac GTX 780, and no error. The GPU seems detected as it should be.
[2016-10-30 19:55:05.246162][0x0000376c]: miner#6 | Starting thread #6 (CUDA-TROMP) GeForce GTX 780 (#0) BLOCKS=84, THREADS=64
had to make a new account to reply but it sort of works! i will post below the solution for AMD R390ās GPUās
EDIT: Thanks louie 
(these options are specific only to people with igpu cpuās. I wouldnāt tell everyone to add it.)
nheqminer_suprnova.exe -c -u egjoshslim.worker1 -p z -t 9 -op 1 -od 0
basically all you need to do is add -op 1 -od 0 too the end of your config. also -t is how many threads. (8 cpuās and 1 gpu in my case) Let me know all those that try it also might need to change the 1 to a 0 or the 0 to a 1 visa versa etc try as is then fiddle.
yes, and these options are specific only to people with igpu cpuās. I wouldnāt tell everyone to add it.
Just to confirm, thereās no new windows binaries, correct?
Yes, only source was released.
incorrect
-t 9 spawns 9 cpu threads (plus one opencl gpu is used due to -od 0)
-t 8 spawns 8 cpu threads (plus one opencl gpu is used due to -od 0)
Isnāt -t 8 -od 0 for using amd cards?
-od is for amd, yes. the number after if for ID numbers of each device.
thanks man seems to be working well now, 50 sols/s! so anyone with the AMD R390 who are having the same issues refer to my post above if you get device not found or opencldeviceID not found etc etc try the solution that worked for me
No speed improvements on GTX 10xx? Private miner getting 120 sol/s on 1070. Your miner is about to become utterly irrelevant.
lol go back to your silent army thread troll
Youāre late to the game. 120 sol/s 1070; not silent army. youāll see (when itās too late judging by your obstinance)
I have 42 sol/s on each of my rx 480ās. Iām doing just fine.
why do i feel you are full of shit? probably because you havenāt posted anything to back up the claim.
Thatās just your constipation acting up again. Proof is there. Do your own footwork.
Whatās Your secret man? Are you on Windows or Linux? Pics or it didnāt happen Iām afraid. Itās like when I met Emilia Clarke at the airport, told all my friends but I had no proof and without pics, it just didnāt happen. Maybe we both had the same hash and dreamt it all.
My Nvidia GTX 760 shows 4000 I/s but 0 Sols/s on CUDA. Worked fine with miner 0.2. Whereās the problem?
You seem to have the same problem as me (with my GTX 780). The card goes to about 10% load and thatās it, 0 sols/s.
In Nicehash Miner v1.7.3.1 where i could change algorithm and benchmark, all algorithms drove the card to 100%, Except Equihash! (Just wouldnāt benchmark). So i figure the problem lies thereā¦ And thereās no way to choose algorithm in this one, right?
*EDIT: Read a bit on this issue and it seems more people with the 7XX-series has this problem (650M NVIDIA CUDA doesn't work with 0.3b Ā· Issue #47 Ā· nicehash/nheqminer Ā· GitHub)
120 Sol/s gtx 1070 by coder who produced branches of lbc miner a little while ago: