Digimint Mining Rig Configuration

So 28 Cards with just 2 1400’s PSU? How do you connect all the pci riser powered risers and pci-e 8 pins?

There’s enough slots for all of the nessecary cables

Digitmint, which operating system + drivers do you use?
I am trying to connect 6 pci-e splitters/switches(3-way) for 18 amd gpus, but no way yet.
On ubuntu 14.04 + fglrx i can connect 8-9 cards (7970-280x) and on ubuntu 16.04 +amdgpu driver only 7 cards (480 8gb).

Digit,
Am excited about your rig config. Cool, initiative, want to learn, from your rig, which OS and mining software are you using to drive this setup, any special landmine and or note, to take note of? Am in a place where power is not an issue too, so am in the same bracket with you.

UPDATING the rig a little here, instead of drop down rack, upsidedown mount with one attached, cards connected via pcie splitter because apparently the normal plugging in your risers to the pcie slots on the board doesn’t work anymore :roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes::roll_eyes: after a long time of frustration I gave up on making the other pcie slots work and settled for five cards on this one board running windows 10 Claymore 9.1.

1 Like

Kindly point me to any of your direct sources, I will take it up from there. Thanks bro, never got near that.

Pointless, been there done that GPU mining rigs European supplier London based Vega RX580 NVIDIA 1070 1080Ti single mining rig to farm setup (part of that thousands $$$$ spent in R&D I did)

Mobo BIOS have limitation due to PCIE resources (12 GPU max on server class motherboards that costs $100’s. Cheap mobo from $50 to $400 only allow for 7 or 8 GPU max) Remove 8 GPU limit on OpenCL driver - AMD Community
GPU drivers have limitations
Regular Windows (non Enterprise) have limitations

I have a bunch of those splitters if someone like to try for themselves http://www.ebay.co.uk/itm/182310350018

Have you tested what is the maximum GPU for MSI Z97 Gaming 5 ?

thats how I felt trying to get 8 working in windows…

7 was the max i could get working with the 1-3 splitter… board would see the other GPUs but only able to use 7 in windows (same with ubuntu, but I think more could work in ubuntu if i tried longer to get them to work, but again 7 was the max it would use.)

tried the m.2 to pcie this morning but the board didn’t seem to like it… will try again in a couple days when I have time…

You can get PCIE splitters from me if you want to try, also have hte m.2 if your brave and want to try that too - but again its totally experiment and try.

PCIE 1-3 splitters


https://cryptomined.com/index.php?main_page=product_info&cPath=1_12&products_id=8&zenid=lujafl1lft290oqg0g2tiuo3q0

m.2 to pcie

https://cryptomined.com/index.php?main_page=product_info&cPath=1_13&products_id=9&zenid=lujafl1lft290oqg0g2tiuo3q0

Ver 006 molex risers


https://cryptomined.com/index.php?main_page=product_info&cPath=1_4&products_id=1&zenid=lujafl1lft290oqg0g2tiuo3q0

Ver 006 6pin risers


https://cryptomined.com/index.php?main_page=product_info&cPath=1_60&products_id=53&zenid=lujafl1lft290oqg0g2tiuo3q0

ZCash T-Shirts




https://www.cryptomined.com/index.php?main_page=index&cPath=2_53&zenid=lujafl1lft290oqg0g2tiuo3q0

:joy::joy::joy: best shift those zcash tea shirts quickly :joy::joy:

they are made on order :slight_smile:
so no worries there
if you have any design ideas let me know :stuck_out_tongue:

These will stand the test of time:


They are rather good I like the design and should be a good seller,must take another look at your site you have some great deals there last time I looked,very competitively priced and some good bargains just what we need.

Thanks :slight_smile: will be adding more stuff
have a bitcoin pillow to add :stuck_out_tongue: custom printed
probably make some others like an orange bitcoin pillow, monero, zcash, dash, maybe the other top coins too, and well doge for fun

will add the option to add a custom wallet QR code to the back of all T-Shirts also. so you can walk around with your wallet QR code on your back :stuck_out_tongue:

also will be adding jewerly with custom QR codes on them so people can easily get deposits to their wallets … like necklaces with your own wallet QR code, key chains etc.

Also want to make custom coins with peoples own wallet QR code on the back… like a Bitcoin with a B on the front and your own wallet QR code on the back.

but that will take some time, maybe early next year we can do the coins
jewelry probably add before new years

Status: Complete
Total Amount To Send: 17.64116000 ETC
Received So Far: 17.64116000 ETC with 5/5 confirms.
Send To Address: 0xfac27e4586baba9cf3e42787d301c121413c518c
Time Completed: March 31, 2017 06:43:39am
Seller: storecheckouts (100%)

Payment ID: CPBC1OH7SNISLQ54A5PJYZETX0

I placed an order at cryptomined.com

U happen to have my tracking number?

Why doesn’t the store remember me?

Let me know.

I thought cryptomined had gone bust.

Problem solved. “PM here to obtained support”

If u can’t get a hold of cryptomined, any other way.

I hope that I am wrong and that you get your stuff. It is sad to think that yet another site may have turned fraudulent.

problem solved. track crpyptomind support here if all else fails

Which replicator did you use?

Regards,
Norman

Can you get me free power like you have? Lol.
Congrats on a nice rig!!!