Jumps from 80-110w every other second + 50w on the board so average of around 145W per RX480 unless the board uses less than 50w.
On my 480’s but now not detecting the other cards and the environmental settings aren’t wanting to load properly
how i can do that?
details
pleaSE?
the problem is that
claymore start hashing
but after 10 minutes
one of gpu card stop hashing and when the claymore try to
restaring
the whole windows freezing
how i can fix that?
[/quote]
Whats the speed of R9 390 cards?
Testsystem HP-Microserver N54L, AMD R9 380x (Gigabyte)
Windows 7
Claymore v6.0 91 sol/s @160 Wh
Claymore v7.0 114 sol/s @ 170 Wh
Ubuntu
Optiminer 0.3.4 83 sol/s @ 155 Wh
But with my energycosts of 22 Euro-Cent per kWh and a price of 67 Dollar per ZEC.
I am thinking about switching back to Ethereum.
Currently its about even for your GPU if you switch back to ETH
230 h/s.
More if you got 390x
I believe ZEC is fallen down to 1$ per ZEC or lower.
It is cheaper to buy then ZEC as mining it now.
ZEC has to stop dropping because it will not be profitable anymore to mine
I will also switch the miner to ETH soon if it continues to drop like that…
Look, I already gave you details a couple days ago.
It’s also explained in the Readme file.
It’s not that complicated.
I hate to be rude but if you can’t figure out such a simple problem
or RTFM then maybe mining is not for you.
Please stop asking me the same question.
1 Like
You can use setx instead of set if you don’t already have the environment variables explicitly set in your system.
1 Like
Ya it seems that more h/s in new v7 goes in sacrifice of much higher watt per hash unless u underclock but u loosing hashes then,so maybe v6 is less power hungry…
Does this look normal coming from 2 nanos claymore v7? The pool reports 1 hash rate and the miner reports another…
Yes that looks about right, closer to 240h/s with -i 4.
Some pools need time to catch up… BTW Nanopool payouts are crap 
1 Like
I cant seem to set up any other pool 
Can i have an example config please…
Maybe suprnova pool? I cant seem to bloody connect
Config file:
-zpool eu1-zcash.flypool.org:3333
-zwal taddress.workername
-zpsw x
-allpools 1
-mport 0
-i 4
start.bat:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe
you might need to user a server closer to you if your not in the EU
1 Like
thank you for this sample config, I also need this. 
1 Like
You legend
Working well thank you
1 Like