What about mining zclassic with claymore? How mould i set this up?
The exact same way. Use the ZCL pool and your address/username.worker and add -allpools 1
Claymore 7.0 7950=120sol/s
1 Like
Do you think it’s reasonable to say 1 sol/s equals 1W of power, if calculating current average power consumption of ZEC network?
What a better Win7 or Win 10 ?
no difference. whatever suits you 
I would check the log file to see if the problem is isolated to a specific GPU. If so you may want to try using a different riser on that GPU. I had similar crashing that was fixed by replacing the riser card.
1 Like
Thats interesting, good idea. I had not considered that. Fingers crossed it fixes the issue 
Does this look normal for a nano mining on clatmore v7? Iv noticed the memory usage is just 1067 mb… is that my sd ram its on about? Or my gpu ram? I mean the nano has 4gb right? How can i utilise the full 4gb anyone?
reboot driver seem not working
1 Like
Your card is not mining,remove any Overclocking and run stock,if not the issue hard reboot system and try again you will see your GPU go to its full clock speed when mining starts,if u are using latest AMD cards rx 400 series update to latest drivers they work fine.
1 Like
The thing is though i get almost 480 h/s with only 2 cards… so im guessing it is mining quite well? This could be a software glitch from gpu-z?
If you are showing correct amount of hash rate on mining software and pool confirms your speed at that end then it would be an issue with GPU-Z check to see if there is an update for GPU-Z that fixes the bug and use latest drivers if using latest cards they work better in my opinion
Which miner version and pool,also which wallet to convert to ETH/BTC
do u guys usually use for mining ZCL?
Not to shabby - I am running rigs with 7 Fury Air at 1600 h/s at around 900 watts at the wall.
or 0.56 watts/h
They are running at 223-226 each and pull under 120 watts each. If I unlock cores it will do 235-240 at about 135 watts each
If I want to pour on the juice I can get them to 270-285 h each but the power is above 200 watts
I have the same problem with flypool. Its like their stealing your hashrate
1 Like
Now its showing 515 h/s… its weird it fluctuates from 415 h/s to about 515 h/s… they seem to be paying ok though
Can i use claymore so it starts as soon as i turn pc on? I mean im trying use my mining rig without a screen as i have limited space… i will use teamwever to remotely connect now and then but would like the miner to start as soon as i press the power switch… anyone managed this yet?