Thank You…
my report:
r7 360 /2gb = 80
r9 280x /3gb = 160
Thank You Optiminer
Looks like 75 sol/s more with the claymore v9.0
@Optiminer great news looks like your miner is on par with Claymore when dev fee is taken into consideration i am a windows user with small farm and looking forwards to windows release with speed increases, this development is good for the community and I thank you for release your new miner, RX 400 GPU’s could do with some optimising and if you could work some magic there I am sure we will all use your miner if you can get more than 250s/s with that GPU
anyone have a command line list for this miner?
Something is wrong… I’m not sure what, but I had about 20 machines eventually hang after switching to v1.0.1. They ran fine for about 20-30 minutes, and then they all froze.
I could ping them, I could establish an SSH socket, but I couldn’t get any terminal output. USB flash drive lights were all blinking rapidly and being flooded with I/O. I eventually had to manually power off/on each machine. This was at more than one location, so I don’t believe it to be power related.
Maybe something broken with the new logging library?
CM gets 225/s (after 2% fee) on an RX-480, this gets 195. CM ~260 or more on 290, and is faster across the board. Even CM V8 was faster than this, and V9 is no contest. Add in minimal features, and lots of crashes, it is hardly “on par”. Even if this miner had 0% fee, and you got the full hashes, CM would be faster on every card. This miner will never do 250H on a 480, better keep dreaming and stick to Ethereum.
what is the relationship between intensity and --nonces-in-parallel?
not much increases at all, only dropped GPU dev fees and uses cpu resources to mine dev fee.
still can’t match CM Miner, this isn’t about how much you got with your dev fee, I’m only concern how linux miner uses your software could compares with windows miner who uses CM.
nonces-in-parallel is an old name for intensity that was only used for some prerelease
[2016-12-10 10:44:01.082] [info] Autodetected ‘–intensity 5’ for device 0.
[2016-12-10 10:44:01.178] [info] [GPU0] Using device Ellesmere.
[2016-12-10 10:44:01.189] [error] OpenCL error: CreateProgram base (CL_INVALID_BINARY)
I symlinked the libOpenCL.so.1 to the one provided by amdgpu-pro
ln -s /opt/amdgpu-pro/lib/x86_64-linux-gnu/libOpenCL.so.1 /usr/lib/libOpenCL.so.1
Also, v0.6.0 works just fine
$ ldd optiminer-zcash-101 | grep libOpenCL
libOpenCL.so.1 => /opt/amdgpu-pro/lib/x86_64-linux-gnu/libOpenCL.so.1 (0x00007f9a28c0e000)
$ ls /opt/amdgpu-pro/lib/x86_64-linux-gnu/libOpenCL.so.1
/opt/amdgpu-pro/lib/x86_64-linux-gnu/libOpenCL.so.1
Since version 0.6.0, does not work for me. 
I recommend you do a fresh download and make sure your run it from the root of the extracted archive.
i hjave problrm with worker.
[2016-12-11 09:29:34.746] [info] [GPU0] 108.0 I/s 191.2 S/s (5s) 107.8 I/s 204.5 S/s (1m)
[2016-12-11 09:29:34.746] [info] [Total] 108.0 I/s 191.2 S/s (5s) 107.8 I/s 204.5 S/s (1m)
[2016-12-11 09:29:36.047] [info] [GPU0] Share accepted! (31 / 31)
[2016-12-11 09:29:39.747] [info] [GPU0] 108.0 I/s 218.8 S/s (5s) 107.9 I/s 205.3 S/s (1m)
[2016-12-11 09:29:39.747] [info] [Total] 108.0 I/s 218.8 S/s (5s) 107.9 I/s 205.3 S/s (1m)
[2016-12-11 09:29:44.772] [info] [GPU0] 109.0 I/s 207.4 S/s (5s) 107.9 I/s 204.7 S/s (1m)
[2016-12-11 09:29:44.772] [info] [Total] 109.0 I/s 207.4 S/s (5s) 107.9 I/s 204.7 S/s (1m)
[2016-12-11 09:29:46.879] [info] Got new work.
[2016-12-11 09:29:49.799] [info] [GPU0] 107.0 I/s 200.4 S/s (5s) 108.0 I/s 205.1 S/s (1m)
[2016-12-11 09:29:49.799] [info] [Total] 107.0 I/s 200.4 S/s (5s) 108.0 I/s 205.1 S/s (1m)
[2016-12-11 09:29:54.822] [info] [GPU0] 108.0 I/s 202.8 S/s (5s) 107.9 I/s 204.8 S/s (1m)
[2016-12-11 09:29:54.822] [info] [Total] 108.0 I/s 202.8 S/s (5s) 107.9 I/s 204.8 S/s (1m)
[2016-12-11 09:29:54.850] [info] [GPU0] Share accepted! (32 / 32)
[2016-12-11 09:29:59.861] [info] [GPU0] 108.0 I/s 195.0 S/s (5s) 107.9 I/s 204.9 S/s (1m)
[2016-12-11 09:29:59.862] [info] [Total] 108.0 I/s 195.0 S/s (5s) 107.9 I/s 204.9 S/s (1m)
[2016-12-11 09:31:28.056] [info] Got new work.
[2016-12-11 09:32:28.124] [info] Got new work.
[2016-12-11 09:32:46.862] [info] Got new work.
[2016-12-11 09:33:16.905] [info] Got new work.
[2016-12-11 09:33:41.071] [info] Got new work.
[2016-12-11 09:35:28.969] [info] Got new work.
[2016-12-11 09:36:04.674] [info] Got new work.
[2016-12-11 09:37:20.739] [info] Got new work.
[2016-12-11 09:38:19.122] [info] Got new work.
[2016-12-11 09:38:34.667] [info] Got new work.
[2016-12-11 09:39:11.031] [info] Got new work.
after some time it keep showing get new wotk and not showing sols and nothing elve
Have you enabled the watchdog? What happens when you restart?
the same here, from 60 rigs about 10 with problems (Got new work… and nothing), using v6 again.
sapphire r9 390, ubuntu 16.04, amdgpu-pro 16.30.3
After reset it going well for few minutes and again got new work… And nothing is happening
Problems whit the New version. Disconnection problems with the pool. And stop the script, continuously.
My 5x r9 390 rig works perfectly. My 6x rx 480 rig doesn’t. Keep stopping after few minutes with got new work messages…
More errors, "Segmentation fault, (Core dumper) " in 2x rx470 + 2x rx480 rig
1 Like