Will there be a version, which does work with other mining pools than nicehash?
Because I would like to keep my zcash and not renting my hashing power.
Although the best miner I have seen so far.
Sorry for the delay. Been busy at work. Itās since cooled down quite a bit and is going around ,*228-235 sol/s total, so *208-215ish from the card at the moment. Seems to go in waves of high/low over hours. Never dips below 200 from the card alone.
See the settings in the attached pic (or as mentioned in above post). EVGA 1070 FTW with the latest thermal bios released by EVGA and the thermal pad mod installed (provided after I bought the card by EVGA due to a known VRAM overheating issue). Latest GeForce driver and windows updates.
My Gtx 970 is getting around 130 Sols/sā¦ is this normal? because the benchmarks say I should only be getting 85 Sol/sā¦
All Stock Settings - Stock card
my gtx980 163.20 Sol/s 0.00 Sol/s (0.00%) 64.0 20
my gtx860m 79.78 Sol/s 0.00 Sol/s (0.00%) 64.0 29
shouldnt my mobile card be running slower then my desktop.and or shouldnt my gtx980 be doing a lot more then my laptop? also for what ever reason my gtx 980 rig is autoconnecting to eu server and iām in california no mater what code i put in.
You should be glad, for most of the time, youāre doing better than my GTX 1080 with your GTX 980
I get between 140-240 Sol/s, but really unstable.
This miner works only with nicehash?
We are releasing new version with improved speeds and some other minorities.
GTX 1070 can now reach ~220 without being overclocked.
https://www.nicehash.com/tools/eqm_v1.0.2c_Win64.zip
You shall experiment with -cm and let us know which mode gives you best speed on certain card.
gtx980ti clocked at 1500/4000 currently getting 268 sols
No clocking using state 0 got me 246 sols
cm2 on my card, max clocks purrāing at 273 sols 1531/4158
Can we run this with other pools?
GTX 970 will best perform with -cm set to 1 (and not default 2). So make sure to use cm 1 if running GTX 970. So a single GTX 970 should reach about 145 Sol/s.
what is are -cm 1 and where to set ?
Command line parameter. See -h first.
Thx!
Impressive : 2Ń
980 (Š¾Ń) + 4 thread AMD FX = 363 sol/s
How much you get on single 980 ?
Thank you. Love it. Working nicely so far. Picked up a second 1070 on cyber monday and hitting 488 sol/s (with CPUā¦ so about 468 or so). Same OC settings as the last post.
Keep track on EVGA and MSI 1070/1080 temerature or VRM not to pass ~80C, I had one MSI die if the cooler is low RPM, GPU temp does not matter but VRM and there is no measuring diode for it
My first 1070 from EVGA was a FTW that was affected by the VRM cooling issue. I just recently updated the BIOS and installed the revised heating pads they sent me. The card I just picked up is the newer 1070 FTW Hybrid (water-cooled) which luckily places the copper heatsink directly on the chip and the VRAM. Iām hoping the air-cooled one will hold up but that does scare me.
No improvement on a 750ti still 67 - 70 sols
1 Like
nopeā¦not such a good thing for meā¦660 sols b version vs 690 c version on cm2 modeā¦cm 1 and cm 3 660 solsā¦(3x1070 MSI Armor 8G OC)ā¦
Following versions has fixed default modes. Maxwell 9xx cards have nice improvement.