Zcash Pool- Zcash.flypool.org

Thanks guys, indeed that is required , I guess since no signup needed - its usually a PIN to confirm a save - very clever!

What is a good working miner for Windows AMD GPU’s I would like to try flypool.

How much do you get from mining?

My hashrate on i7 CPU is 20 Sol/s
I’m mining on flypool for 9 hours already (starting from around block 550).

To my calculations, based on % of the pool (which was averagely 20/70,000 = 0.03% through the night, and now lowered to 20/220000 = 0.01%) - I should be getting around 0.02% of pool earnings. Pool mined around 34 blocks through the time I was mining, each one worth around 0.35-0.5 ZEC, which makes it around 0.425*34 = 14.5 ZEC total to flypool.

So for the 9 hours I mine, I should have 14.5 ZEC * 0.01% = around 0.00145 ZEC on my balance right now. But I have only 0.00054 ZEC, which is more than twice less. What’s the problem? Maybe I need to try another pool? Can’t find any calculations statistics either… How much paid per share, etc. I was submitting 300-400 shares first couple of hours, and then suddenly dropped to 200, and now to 160 shares/h. Is this normal? Is this a difficulty increase or smth?

Also, if comparing my 20 Sol/s the calculations are as follows:
20 / 1.300.000 = 0.0015%
I’ve started to mine on around block 550, when reward was 0.35
Whole network mined around 250 blocks for 9 hours (which is 2.2 blocks per minute btw), and now the reward is 0.5. So the network should had earned around 100 ZEC.

And my share of it should be also 100 ZEC * 0.0015% = 0.0015 ZEC, but I still have 0.00054 ZEC, which is almost the third part of what it should be.

Why?

How much have you earned with your hashrate?

1 Like

These are my stats from yesterday.

Wallet:
2016-10-28 21:34 0.00089
2016-10-28 22:31 0.00143
2016-10-28 23:32 0.00188

Pool: 49k - 24k, so average = 25kS/s
Me: 30 S/s = 0.0012 of pool rate
Blocks Found: 4 * 0.425
Pool ZEC earned: 4 * 0.425 = 1.7 ZEC

Should have earned: 1.7 ZEC * 0.0012 = 0.00204 ZEC
Actually earned: 0.001 ZEC

Is somebody scamming us? Or is something wrong with our calculations? Also take into account that blocks were earned in the period of 24kS/s, and since my contribution was constant 30S/s I should have earned even more ZECs.

1 Like

Yeah, would be best to be able to see these calculations live, would reduce the confusion.
Staying with flypool today, but would be great to see some explanation here

1 Like

Pool owners could theoretically sell mined coins yesterday for 20BTC, and then later buy them out today for 10BTC, making some profit.

Practically - is there flypools payout address known? Although, with anonymous currency - it’s hard to track the transactions :slight_smile:

And yes - it would be great to see something like supernova blockshares stats, with exact calculations.

P.S. And add a mainnet block explorer to all links on flypool, please. Cmon, it’s up for 12 hours already and you’re still linking to testnet :slight_smile:

Btw, on nicehash pool https://zcash.nicehash.com/tbs I see:
Total blocks 42
Pending 21
Confirmed 21

Which is like half of the blocks are confirmed there yet. Maybe long confirmation times are the issue here too?

Might this be of any use?

I am getting this error while compiling too

1 Like

@peter_zcash

got payout 30 minutes ago, but cannot find any information about the transaction. How can I find that transaction?

After set var ZADDR i receive empty result with
~/zcash//src/zcash-cli z_listreceivedbyaddress ā€œ$ZADDRā€

someone got an idea?

edit:
I see the transaction with:
~/zcash//src/zcash-cli z_getbalance ā€œ$ZADDRā€ 0

—> seems that the transaction is not confirmed yet … :(, this takes a lot of time waiting over 1 hour now …

Hi there,

I’m trying to change payment threshold, but minimum value cannot be saved. Has some one the same issue?

You have to enter your Public IP there (where it shows last digits) - it’s a protection so no one can change your settings except you.

its answered just a few post up … must enter you public IP address then Save

Genoil miner crashes INSTANTLY no matter which version or what settings… I’m on the latest version of windows 10 64bit and latest AMD dirvers, RX470’s with 1500 custom straps bios.
How can I make it work?

I’ve the same issue. it doesn’t save

Found flypool miner address:
https://explorer.zcha.in/accounts/t1XepX38RxS3o5hLioLbaNb6Fa2Y2Be55xw

Blocks Mined - 193
Public Balance - 17.54

And btw yes, don’t forget that 20% of each block goes to ZCash Founders (the second transaction always is to Accounts - Zchain )

1 Like

Because of the buggy Zcash wallet payments are currently delayed.

The main problem is that Zcash is not correctly managing transactions to and from Zcash addresses and it requires a wallet restart & rescan to somehow update the balances of Zcash addresses. There is not much we can do at the moment, this issue has to be resolved by the devs urgently.

More info about the bug: unconfirmed transactions Ā· Issue #1705 Ā· zcash/zcash Ā· GitHub

Edit: We have disabled payments to z addresses until the wallet issue has been resolved!

1 Like

hmm. . lots of people reporting they are seeing less than expected balances in their account, and now pool owner saying payments have been turned off for an indefinite period of time

yikes

Is there a working amd gpu miner for Windows?

GPU Miner i’m currently using on AMD R9 280

Having some real trouble getting some humble Intel processor mining action going. I was getting a ā€œworker not authorizedā€ error, but now getting this when trying to mine on an Ubuntu machine…

–

Equihash CPU Miner for NiceHash v0.1c
Thanks to Zcash developers for providing most of the code
Special thanks to tromp for providing optimized CPU equihash solver

Setting log level to 2
[16:21:17][0x00007f4b16474700] stratum | Connecting to stratum server equihash.eu1-zcash.flypool.org:3333.nicehash.com:3357
[16:21:17][0x00007f4b16474700] stratum | resolve: Host not found (authoritative)
[16:21:17][0x00007f4b16474700] stratum | Reconnecting in 3 seconds…
[16:21:20][0x00007f4b16474700] stratum | Connecting to stratum server equihash.eu1-zcash.flypool.org:3333.nicehash.com:3357
[16:21:21][0x00007f4b16474700] stratum | resolve: Host not found (authoritative)
[16:21:21][0x00007f4b16474700] stratum | Reconnecting in 3 seconds…
[16:21:24][0x00007f4b16474700] stratum | Connecting to stratum server equihash.eu1-zcash.flypool.org:3333.nicehash.com:3357

–

Anyone have any tips on how to resolve this? Getting same error when trying to connect to any pool, on two separate machines.