EthOS on GA-H110-D3A only sees 5/6 1070 GPUs


I have an issue with running 6 x1070s on GA-H110-D3A motherboard. EthOS only sees 5 GPUs but “lspci” shows 6 of them. Then in “dmesg” output i see:

[ 12.736010] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid:
[ 12.736010] NVRM: BAR1 is 0M @ 0x0 (PCI:0000:07:00.0)
[ 12.736010] NVRM: The system BIOS may have misconfigured your GPU.
[ 12.736013] nvidia: probe of 0000:07:00.0 failed with error -1
[ 12.736033] NVRM: The NVIDIA probe routine failed for 1 device(s).

Any idea? I tried to also run “lga1151-flasher” and i got: “Update Aborted: No Motherboard Bios Found - Log has been posted to support staff.”

Any clue? Thank you in advance.

6x 1070 on GA-H110-D3A. Same problem 5 but not 6

I can get a 6th to detect but has limited resources.
If i turn on mining mode i get stuck in a bios loop.
If i turn off mining mode but turn on 4G decoding i get a black screen
If i turn them both off it boots and i can get 5 but not 6 GPUs in Windows.

Same problem here ! Swith for windows to see if it was an ethOS problem. But even in W10 5 gpus detected. I suspect something with the motherboard. Any news ? Or idea ?