I agree, got to be the card. Not sure about the warranty. If you run a gaming benchmark on the card and get the same problem, then you can RMA on that. Try to avoid telling them your a miner (if you can)… the VAR’s are not real fond of RMA’s from miners.
Yeah, won’t mention it of course haha. Even still though, the cards have only been running for a couple of weeks.
Well, I have some molex v9 risers now, I replaced all the riser for the EVGA cards with the molex risers with 1 molex cable per riser. I only have 2 more molex cables left (including the molex cable that is powering the m.2 pcie, but I wouldn’t expect that to use much power?). Would I actually be better off running 1 molex cable for 2 risers than using the sata risers with 1 cable per?
Is it possible to do this on windows…?
Hello, guys! I think this can be interesting for you [CMD] FarmWatchBot (Autorun/Watchdog) for Ewbf, Claymore, Dstm, CCminer, Bminer, Ethminer, CastXMR, Phoenix, T-Rex, Gmnr, NB
2 Likes
hey mate, have you ever tried to change/set different solvers in EWBF manually? You will find out, the same card gives different rate with different solver. good luck
Hello, did you manage to solve your problem? Im having the same issue. I have 6 EVGA 1080ti Black SC and I cant run them at 100% The most i managed to get was about 670 on some cards, averaging 668 on all of them. Do you think the issue has to do with the brand? Well, i never tryed to OC each separately, I dont know how to do that. I think when i overclock i change all of them at the same time?
Well I had issues with EWBF crashing and this seems to be corrected for now, fingers crossed. I am running 5 gtx 1080’s and the hash rate was fluctuating a lot and eventually it would crash after minutes or even 8 hours. I took the advice to hook up the PCIE risers to separate SATA connections from the PSU instead of daisy chaining, also each card is power by the same PSU that is powering the PCIE riser and I put 2 of the cards directly on my mother board. So I have 2 on the mother board and 3 on risers. Its been up and consistent for about 15 hours now. I also brought the power down to 90% on all cards and no overclocking yet. I actually have one card that runs hotter than the others and I turned the power down on that one to 70%, increased fan speed and I still get over 500 sols. without overclocking the cards are averaging about 510 sols. After a couple of days I will try to increase the overclocking.
Hi Eulers, Can you help me? im building an 4 evga 1080 ti sc2 and 2 evga 1060 6gb, but ive been reading that afterburner does not seem to be able to control the sc2 fans and that precision X does not open with more than 4 cards, I previously though about using precision X to OC the 4 1080 ti sc2 and afterburner for the 2 1060, but I think it wont be possible, I read that u used sc2 and mixed them with some other cards, did you manage to get them running?