Yes, a separate version for amd is in planning
New version banet-miner-os-v37.img.gz released. With dstm 0.5.2 and minor bugfixes. Get it from https://ba.net/mineros/
Is it possible to update to Nvidia driver 384 or 387?
I am working on a new branch (unstable). That will have the newer nvidia driver. Also ccminer and xmr-stark. Hopefully in a week or so
hi , how about your sol rate by ccminer. my gtx1066 only got 230sol/s ,but got 300 sol/s by ewbf miner. system is ubuntu1604.
017-10-28 10:43:14] found => 000c08a0 a0080c00
[2017-10-28 10:43:14] GPU #0: Colorful GTX 1060 6GB, 233.68 Sol/s
[2017-10-28 10:43:14] GPU #0: 1949 MHz 2.18 Sol/W 108W 71C FAN 60%
[2017-10-28 10:43:14] accepted: 13/13 (diff 626.215), 236.25 Sol/s yes!
[2017-10-28 10:43:15] sleeptime: 500 ms
[2017-10-28 10:43:15] GPU #0: start=000c08a2 end=001c08a1 range=000fffff
[2017-10-28 10:43:26] GPU #0: 2675 solutions in 11.33 s (236.02 Sol/s)
[2017-10-28 10:43:26] found => 001029c8 c8291000
[2017-10-28 10:43:26] GPU #0: Colorful GTX 1060 6GB, 236.01 Sol/s
[2017-10-28 10:43:26] accepted: 14/14 (diff 140.280), 236.23 Sol/s yes!
[2017-10-28 10:43:27] sleeptime: 500 ms
[2017-10-28 10:43:27] GPU #0: start=001029ca end=002029c9 range=000fffff
[2017-10-28 10:43:35] GPU #0: 1815 solutions in 8.46 s (214.47 Sol/s)
[2017-10-28 10:43:35] found => 0011849e 9e841100
[2017-10-28 10:43:35] GPU #0: Colorful GTX 1060 6GB, 214.47 Sol/s
[2017-10-28 10:43:35] GPU #0: start=001184a0 end=0021849f range=000fffff
[2017-10-28 10:43:35] accepted: 15/15 (diff 68.611), 234.05 Sol/s yes!
[2017-10-28 10:44:20] GPU #0: 1949 MHz 2.16 Sol/W 108W 71C FAN 60%
[2017-10-28 10:44:41] GPU #0: 15541 solutions in 65.81 s (236.15 Sol/s)
[2017-10-28 10:44:41] found => 00311fa0 a01f3100
[2017-10-28 10:44:41] GPU #0: Colorful GTX 1060 6GB, 236.15 Sol/s
[2017-10-28 10:44:41] accepted: 16/16 (diff 168.492), 234.24 Sol/s yes!
The ccminer is checked out from github
Might want to add:
āenable-all-gpus to the nvidia-xconfig instantiation
-a, --enable-all-gpus
Configure an X screen on every GPU in the system.
Use one of the dedicated Equihash miners.
Ah, didnāt know -a was the short version. Thanks
hi , I try your Pendriver OS , there is an ACPI error:
ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L6F]
This error message flooded the kernel ring buffer. I search by google , found someone fixed by below command and it worked.
#echo ādisableā > /sys/firmware/acpi/interrupts/gpe6F
Thanks. I will add it
New version banet-miner-os-v37.img.gz ready at https://ba.net/zcash-eth-miner-os/
With free cloud stats agent for ewbf, dstm and claymore.
I noticed Ext4 error messages after a sudden power loss so is it possible to run fsck on boot?
best thing would be to mount the pendrive on another machine and run
sudo dosfsck -w -r -l -a -v -t /dev/sdc1
Faster to just switch out the drive.
Tried using xmr-stak-cpu but got
MEMORY ALLOC FAILED: mmap failed
Needed to edit sysctl.conf and limits.conf.
Went to download image file but itās been removed?
Hello
I only can put one gtx 1070 working
If i put the second it crash
try this on your motherboard bios setup
Make sure you are running the latest BIOS
Upgrade bios to newest (important)
Enable 4G encode
Set PCIe support to Auto
Enable onboard graphics to default (PEG - > IDG)
Plug your monitor into the ONBOARD graphics