So fairly new to this esp with linux, joined up on your site but can’t seem to get my worker to show as active, been hunting through thousands of posts but can’t seem to find the answer. I’m current mining with Silentarmy its all running around 75sol/s on a rx480. from my Terminal i’m typing
./silentarmy --use 0 -c stratum+tcp://zec-eu.suprnova.cc:2142 -u t1XBtN9M2AnbVcshBwK1VjesTiRsaW9nYpR
I’m sure im missing something obvious if anyone could point it out to me that would be grand 
You need to register to suprnova and instead of your taddress use your username.worker
I’ve registered so ./silentarmy --use 0 -c stratum+tcp://zec-eu.suprnova.cc:2142 -u workername is that correct? Thanks
This is what I get b@mb:~/silentarmy$ ./silentarmy --use 0 -c stratum+tcp://zec-eu.suprnova.cc:2142 -u usermb
Connecting to zec-eu.suprnova.cc:2142
Stratum: invalid msg from server: mining.authorize failed: {‘id’: 2, ‘error’: None, ‘result’: False}
You need to put username then workers name for pool
-u Username.workersname -p z --use 0,1,2,3
Depending on how many cards you have 0 is for first GPU and so on,been a while since I used silent army but this worked for me
like this? --use 0 -c stratum+tcp://zec-eu.suprnova.cc:2142 -u usermb -p password
cheers
so its running when I type ./silentarmy --use 0 -c stratum+tcp://zec-eu.suprnova.cc:2142 -u Minibeast.usermb but it still shows an X under active in my workers, does it just take time to register with the server?
Should update in couple of minutes if all is good
well I’ll leave it running for a short while before fiddling any more. Thanks to you both for your help, it’s been a big learning curve.
Should show worker active now if your configuration is correct,silentarmy is not fastest miner at minute Claymore has that crown,let me know if you need help with bat file to run Claymore,getting late here so you can get me next 20 minutes
hasn’t shown as active, also late here too, think I’ll leave it for tomorrow and check out claymore then. thanks and good night.
No problem here is bat file for Claymore you will get v8 from suprnova pool link is in help section
ZecMiner64. exe -zpool zec-eu. Suprnova. cc:2142 -zwal username. workername -zpsw i 6
i 6 is intensity settings choices are 1 to 6
This will get you up and running with Claymore,if you have any problems will most likely be your account settings on pool,use your pool login for username in workers setup and same for bat file.
@ocminer nice hash still isn’t working… I don’t think the difficulty adjustment is working properly… It’s showing up as 256??
hi @ocminer,
I also requested manual payment and I’m not sure it’s gone through, I can’t see it in my wallet.
this is the transcation Transactions - Zchain
I am t1gFxU4LEcd2mjFyGTZKcUWvh4xuDzxr1Ue
thx
looks like it’s fixed
Then try the regular port but with d=16384 as password, regardless what your real password is
Update: issue solved - not suprnova’s fault.
Can you tell me the txid of the missing payment? Should be in your Transaction list
You can mine with your wallet address as well but please add a worker name after the address so something like
t1XBtN9M2AnbVcshBwK1VjesTiRsaW9nYpR.rig1
solved. thanks ocminer
Hmm this is weird, I see the payment confirmed from the pools side and I can also find it on the block explorer:
https://explorer.zcha.in/transactions/6347c4410498f599d7c826722e667aa02c1bcaf4d2c2fad4c9d468fd4562f2b4
Where did you send it too ? Polo ? Did you asked them already ?
@ocminer
The problem has been solved - it was nothing to do with your end.
I apologize for wasting your time and I appreciate your continued support efforts.
Cheers and thanks!