Im using 16.9.2 I think… either that or 16.10.1 but I think even the new 16.10.5 will work.
@peter_zcash How is this possible? Is flypool not taking into account the vardiff of each share? This happens both on CPU and GPU with very different miners. After connecting the miner finds shares very frequent, like every second. After some time the diff is probably adjusted upwards and the shares are found less often, like every 30s. However since they are at a higher diff, the share statistic should not drop. Unless of course you ignore the diff at which each share was found.
Can we assume this is only a display bug and not affecting the rewards?
Sorry to the pool’s team for the worries,it was my fault. I don’t read rightly…
I wonder if i can get more perfs with my rx470 crossfires who reach around 25-27 sol/s on genoil’s miner…
@peter_zcash When I start the miner and shares are found like every second, the GPUs are continuously at 100% load. Once the pool starts to give me work with higher diff (I assume!) the GPU load drops regularly. The higher the diff and the less frequent the shares are found, the more frequent the GPU load drops (see on the screenshot: GPU Load).
So I start to wonder if the drop in the shares statistic is not just a display bug, but indeed a real drop. On the other side why does the “current effective hashrate” then not drop? After all that one is calculated based on the submitted shares.
When can we do manual withdrawls? I have a balance of 0.02323 ZEC that i can’t withdraw
@Hotmetal Go to Settings and adjust your payout threshold. There are no manual withdrawals in this type of pool.
Hi. I have the payout threshold set at 0.01 and a balance of 0.012 for over an hour, and no payment has been made. Shouln’t payments be made every 10 minutes?
I’ve tried to change my payment threshold multiple times now and it is not saving it
you have to enter the Ip of the worker under the amount you need to set for security reasons… Otherwise anyone can change your settings. Did you tried that ?
Yup. Even with correct email address and worker ip it won’t let me change it
Something weird going on with the pool… It states i still have 4 workers connected (which i don’t) with a total hash rate of 0… It’s like things are not updating (and havent for hours)
Yes it is a typo - main.cpp of course 
Hello,
Can you uprade to versions 0.3 or the miner?
Thanks,
-Scoundrel
Supposedly yes, if you just change the source code lines (probably in main.cpp) that point to the pool server address/port before compiling. I am running on Linux, so sorry I can’t give you detailed instructions.
So I installed the newest Genoil and its’s working great… but I have 1 issue… looks like it starts off submitting a ton of valid shares, but then slows down… anyone else seeing this?
1 Like
Can someone please help me with 3 codes… ill give a donation to whoever helps…
im mining on flypool. but at a low rate between 5-10 sol
im running 3 computers and anyone supply code to increase the speed
this is my code so far
nheqminer.exe -l eu1-zcash -u t1eB3utyR5PM76HdbiQgHCjrdYQe3kxF7QK
i have a macbook pro 2015 running windows
a toshiba satellite s50Dt-b
and a lenovo yoga 2
i would like to get the gpu’s running… currently all 3 are putting out 30h/s…
I am having a similar issue. my Public IP ends in .55
Is that the problem?
@MrJaekin See above, same problem. Waiting for flypool to reply.
Try this instead nheqminer.exe -l us1-zcash -u t1TmKn82VCePu8PaHzzaFefdmyTTWkCuAiM.main -cd 0
Thats what I use and it works great, If all the gpus dont run then try cd 0 0 0 (add as many zeroes as gpus)
@nanona. Thanks! Sorry, just got back from church and saw the stats… hadn’t ran through the thread yet. Hopefully @peter_zcash can take a look. Thanks!
EDIT: HUGE thanks to @Genoil for the updated miner!