I mining with one R9 390x & R9 280x & R9 380
and give about 4-8 s/s for each Card with windows 10 * Genoils !!
what’s wrong ? and only 2 my card working.
which bat file i must create with correct setting for best S/S ? please send an example
thanks
Just one more thing:
I’m running three separate miner instances on a single rig over here:
1 x Xeon E1230 CPU → Nicehash, 7 Threads, ~20 Sols/s
1 x RX 480 (standard, no ocing) → Genoil V0.41-> Suprnova ~ 30-36 Sols/s
genoil.exe -c zec.suprnova.cc:2142 -u username.worker -p x -g 0 -k zec zec
1 x 7990 → Genoil V0.42-> Suprnova ~ 55-60 Sols/s
genoil.exe -c zec.suprnova.cc:2142 -u username.worker -p x -g 1 2 -k zec zec
What you can see is that -g 0 addresses my RX480 while -g 1 2 points to the GPUs of my 7990
1 Like
Dear PasPartu
you work with windows 10 ? can you say which good code i must write for my bat file …thanks
Genoil, are these newer versions requiring faster CPU too?
It crashes sending/receiving jobs 
Thats on i5-Sandy Bridge , win 10
On E2180 , Win7, 3GB ram, it makes 19-26sol/s on 7950
no idea why it works there 
0.4.2 is working on 270x and 280x but it crashes after few minutes on mining.
Rockstable since the release.
I also added another 280x - works fine, stock Bios, stock settings - so lots of room for improvement 
I see alot of you guys got this working which drivers do you use?
What does “-k Zec Zec” do?
It’s not in the help command (-h)
still getting 0 sol/s
Just to report, 0.4.2 still doesn’t work on NVIDIA.
R-370 works (~ 20/s). The same as R-380 ( ~ 20/s).
280x works but crashes after 10min or so.
4xR9 390 works but only 15/s (56-60/s total)(Win 7 X64 8gb ram radeon 16.9.2)
seems to be on the slow side.
Sometimes crashes and sometimes works for hours.
Still stable
Windows 10
Radeon 16.10.3
1 Like
0.4.2 stops working after 5 minutes. W7x64 R9 390 29-32 sol. Which driver uses Claymore?
If there are different cards in the rig it crashes.
After running with 1 card (-g 0 -g 1 etc(, its working.
Probably needs pre-compiled kernel…
Still quite CPU-demanding
7950 makes 20s/s on low CPU and up to 25-26 on i5 cpu
And on slow CPu 290/470 make less than 20
4xR9 280x are runnung with 100 sol 
you saved my day genoil!!! dance
1 Like
I am using the latest Genoil 0.4 mining on flypool, and after a while 2 of the gpus were mining at 0.00 sol/s
Looks like stop and restarting has fixed the problem so far, but shouldn’t happen though.
Just one bad thing about about V0.42:
It crashes on the RX480 - so I’m still running V0.41
Do you have mixed cards in your rig? If so, try running with 480 alone, then with all other cards separate and then with all together.
1 Like