much respect crosswire thx 
For GTX1070 compared:
nicehash stock: 36 sol/s
nicehash latest: total bull crap
zcminer latest : 48 sol/s but unstable due to devfee -2,5% fee and -2,5% stable so lets call it a stable 40+
maztheman latest: 42 sol/s STABLE with no dev fee or high CPU
In addition zcminer users 80-90% power but @maztheman a stable 56-58% so !!! nice job
so congratz @maztheman you have the most stable performing miner for CUDA atm
a new release has been made that fixed the CPU flag bug:
This is what I get with my 970 GTX
Setting log level to 2
[17:06:14][0x0009f874] Using SSE2: YES
[17:06:14][0x0009f874] Using AVX: YES
[17:06:14][0x0009f874] Using AVX2: YES
[17:06:14][0x0009fbe8] stratum | Starting miner
[17:06:14][0x0009fbe8] stratum | Connecting to stratum server zec.suprnova.cc:2142
[17:06:14][0x0009f438] miner#0 | Starting thread #0 (CUDA-SILENTARMY) GeForce GTX 970 (#0) BLOCKS=128, THREADS=64
[17:06:14][0x0009fbe8] stratum | Connected!
[17:06:14][0x0009fbe8] stratum | Subscribed to stratum server
[17:06:14][0x0009fbe8] miner | Extranonce is 7e4a0040000000000000000040004a7f
[17:06:14][0x0009fbe8] stratum | ←[35mTarget set to 00f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0←[0m
[17:06:14][0x0009fbe8] stratum | ←[36mReceived new job #16d←[0m
[17:06:14][0x0009fbe8] stratum | Authorized worker minime.esae
[17:06:19][0x0009f438] stratum | Submitting share #4, nonce 00000000000000000000000000000034
[17:06:19][0x0009fbe8] stratum | ←[32mAccepted share #4←[0m
[17:06:24][0x0009f874] ←[33mSpeed [300 sec]: 12.9077 I/s, 23.8143 Sols/s←[0m
so you are doing it wrong then, please read all the post and try again
Incooperate these changes and we are at a good point to compete:
Hello Crosswire,
How do you get the 42 sol/s on a GTX 1070 ?
I’m running version 0.4g with the following command line :
nheqminer.exe -l eu1-zcash.flypool.org:3333 -u txxxxx.JSLRig -t 0 -cs -cb 256 -ct 32 -cd 0
I get 36.5 Sols running on a EVGA 1070 SC Card.
Has someone compiled it in linux?
nheqminer -l us1-zcash.flypool.org:3333 -u txxxx.xxxx -t 4 -cv 0 -cd 0 1 -cs -cb 256 256 -ct 64 64
using v0.4g
i7 with 2x 780 Ti
with this setting i get about 18 sol, flypool shows 10H/s
-t 6 will give me around 21 sol but then the pc becomes unusable
setting -t lower 4 will crash the miner
cpu 77%
just tested nheqminer -l us1-zcash.flypool.org:3333 -u txxxx.xxxx -t 4
and i get 22 sol
cpu 55%
flypool still only showing 10
that, and the cpu usage! Would be awesome.
0.4g my GTX1070 work ing and cb 8192 ct 8.= 37 sols/s but i want 50 sols:yum:
Silentarmy v5 is out. Any idea when we’ll see windows binaries?
from me probably a few days
Thanks @maztheman! I was using the standard nheqminer 0.3a with 4 threads of my core i5 4690k + a gtx 1070 and getting approximately 47 sol/s. Now I use your miner with this in my .bat:
nheqminer -t 4 -cs -cd 0 -cb 256 -ct 32 -l zec-asia1.nanopool.org:6666 -u t1aQyPEJmfR6A378jv5saXJxKzfsLRK58Zy.lounge
and I see around 59 sol/s.
I am also using Ethos on 2 rigs which were formerly mining ETH but now they use a linux version of silent army. They are 5 GPUs each and I get about 420 sol/s from them.
Increase is mostly due to the share memory being faster on Pascal. V5 is worse on an cuda card before Maxwell. I made a build I think where it will detect what version it should run. It’s not the highest Sol rate out there but it’s windows